Brazil Rf Compliance - 3Com 3CRUSBN275 Quick Installation Manual

Wireless dual band 11n usb adapter
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
should check the current channel of operation. If operation is occurring
outside of the allowable frequencies as listed above, the user must cease
operating the 3Com Wireless Dual Band 11n USB Adaptor (3CRUSBN275;
M/N: WL-606) at that location and consult the local technical support staff
responsible for the wireless network.
This device must not be operated in ad-hoc mode using channels in the
5GHz bands in the European Community. Ad-hoc mode provides a direct
communication between two client devices without a Wireless LAN Access
Point.
This device must be used with Access Points that have employed and
activated a radar detection feature required for European Community
operation in the 5GHz bands. This device will operate under the control of the
Access Point in order to avoid operating on a channel occupied by any radar
system in the area. The presence of nearby radar operation may result in
temporary interruption in communications of this device. The Access Point's
radar detection feature will automatically restart operation on a channel free
of radar. You may consult with the local technical support staff responsible for
the wireless network to ensure the Access Point device(s) are properly
configured for European Community operation.

Brazil RF Compliance

Este produto está homologado pela ANATEL, de acordo com os
procedimentos regulamentados pela Resolução 242/2000 e atende aos
requisitos técnicos aplicados.
Este equipamento opera em caráter secundário, isto é, não tem direito
a proteção contra interferência prejudicial, mesmo de estações do mesmo
tipo, e não pode causar interferência a sistemas operando em caráter
primário.
Para maiores informações, consulte o site da ANATEL –
www.anatel.gov.br
8

Advertisement

Table of Contents
loading

Table of Contents