[ IX Disassembly Procedure ]
4. Blower/Fan Assembly
Exercise caution when removing heavy parts.
1. Remove the Blower and Filter panel (along with filter if
installed) indicated in section 2.
2. Remove the (1 or 2) brackets that secure the coil as-
sembly. (Fig.11)
3. Remove the door that covers the small enclosure at-
tached to the fan assembly (Fig.12). Unplug the motor
and route the wire harness out of the enclosure.
4. Remove the (2) screws that secure the fan assembly
and slide out.
HWE1405A
Fig.11
Fig.12
- 36 -
GB