Finishing Component Removal - Fujitsu ESPRIMO K55x/24 Series Operating Manual

System expansions
1
2
► Pull the EasyChange rails off the hard disk drive.
► If you no longer need the EasyChange rails, secure them again at their location in the drive cage.
It may be necessary to modify the entry for the drive in the BIOS Setup.

Finishing component removal

► Reconnect the previously disconnected cables to the device.
58
► Slightly press together the EasyChange
1
rails mounted on the hard disk drive (1) and
pull the hard disk drive completely out of the
drive cage in the direction of the arrow (2).
Fujitsu