Icom AD-118 Instructions

ACC ADAPTER
AD-118
PRECAUTIONS
CAUTION: NEVER expose the adapter and
the connected transceiver to rain, snow or
any liquids.
NEVER disassemble the adapter. The adapt-
er contains no user-serviceable parts.
DO NOT use harsh solvents such as ben-
zine or alcohol to clean the adapter, because
they can damage the adapter's surfaces.
BE SURE to attach the socket cover when
the accessory is not connected.
Use only the recommended accessories*.
Connection to other equipment may cause
problems, such as;
• Audio does not output correctly.
• The transceiver does not detect the con-
nected accessory.
• The PTT switch of the connected acces-
sory is disabled.
* See the back page for details of the recom-
mended accessories.
Icom, Icom Inc. and the Icom logo are registered
trademarks of Icom Incorporated (Japan) in Japan,
the United States, United Kingdom, Germany,
France, Spain, Russia and/or other countries.
INSTRUCTIONS
Thank you for purchasing the AD-118
.
adapter
Please read these instructions thorough-
ly before using the AD-118.
SUPPLIED ACCESSORY
Ferrite core
( See the back page
for details.)
DESCRIPTION
Socket cover
q ACCESSORY SOCKET
Connects to the recommended acces-
sories.
See the back page for details of the rec-
ommended accessories, pin assign-
ments and connections.
w PTT SWITCH
Hold down to transmit; release to receive.
• While holding down this switch, speak into
the microphone of the accessory at a nor-
mal voice level.
e CONTACT PINS
Contacts with the transceiver's multi
connector.
See the back page for details of the pin
assignments and connections.
acc
q
w
e