Fuse Locations - Acura MDX Sport Hybrid 2019 Owner's Manual

HANDLING THE UNEXPECTED
• Use the jack provided in your vehicle. Other jacks may not support the
weight (load) or fit the jacking point.
• Do not use while the engine is running.
• Use only where the ground is firm and level.
• Use only at the jacking points.
• Do not get in the vehicle while using the jack.
• Do not put anything on top of or underneath the jack.
Replacing the Flat Tire
n
1. Remove the wheel nuts and flat
tire.
2. Mount the compact spare tire.
Replace the wheel nuts and lightly
tighten them.
3. Lower the vehicle and remove the
jack. Tighten the wheel nuts in the
order indicated in the image. Go
around, tightening the nuts, two to
three times in this order. Do not
overtighten the wheel nuts.
If you drive with the spare tire installed, the low tire pressure/TPMS
indicator appears. The indicator stays on until a regular tire is installed and
the TPMS system is recalibrated.
120 |
n Storing the Flat Tire
1. Remove the center cap.
2. Place the flat tire face up under the hoist. Insert the hoist bracket into
the center hole of the flat tire.
3. Insert the hoist bracket into the
center hole of the flat tire. Turn the
wheel nut wrench with the jack
handle bar clockwise until the flat
tire rests against the underbody of
the vehicle and you hear the hoist
click.
4. Securely store the jack, jack handle
bar, and wheel nut wrench back
into the tool case. Store the case in the cargo area.
Loose items can fly around the interior in a crash and can seriously injure
the occupants.
Store the wheel, jack, and tools securely before driving.

Fuse Locations

If any electrical devices are not working, turn the vehicle off and check to see if
any applicable fuse is blown. Fuse locations are shown on the fuse box cover.
Locate the fuse in question by the fuse number and box cover number. Refer
to the Owner's Manual at owners.acura.com for a complete fuse chart.
HANDLING THE UNEXPECTED
| 121