Menu System Configuration; Basic Menu; Items In The Basic Menu - Sony Betacam SX DNW-A22 Operation Manual

5-1 Menu System Configuration

The menu system of this unit comprises the basic
menu and extended menu.

• Basic menu

This menu is used to make settings relating, for
example, to the following.
- the hours meter
- the character information superimposed on the
output to the monitor
- switching between the 525/60 (NTSC) system and
625/50 (PAL) system
- the menu banks for retaining menu settings
5-2 Basic Menu

5-2-1 Items in the Basic Menu

The basic menu contains the following items.
In the "Settings" column of the table, the factory
Item number Item name
a)
002 CHARACTER H-
POSITION
003 a), b) CHARACTER V-
POSITION
a) When setting items 002, 003, 009, and 011, watch the
monitor screen, and adjust to the required state.
For detailed information about menu operation relating to
the hours meter, see Section 6-4 "Digital Hours Meter"
(page 6-3).
• Extended menu
This menu is used to make a wide range of settings
relating to the functions of this unit, for example, the
control panel functions, video and audio control, and
digital data processing.
default settings are indicated by an enclosing box.
Settings
Adjust the horizontal screen position of the character information output from the
COMPOSITE VIDEO OUTPUT 2 (SUPER) connector for superimposed display
on the monitor.
00 ... 14 ... 22 (525 mode)/00 ... 12 ... 22 (625 mode): The hexadecimal value 00
is for the far left of the screen and 24 (decimal 36) for the far right. Increasing
the value moves the position of the characters to the right.
Adjust the vertical screen position of the first line of the characters information
output from the COMPOSITE VIDEO OUTPUT 2 (SUPER) connector for
superimposed display on the monitor.
00 ... 56 ... 6A (525 mode)/00 ... 6A ... 81 (625 mode): The hexadecimal value
00 is for the top of the screen and increasing the value lowers the position of
the characters.
b) When displaying time code values, there is a slight time
delay. Therefore, when creating a tape for off-line
editing, the information inserted in the upper half of the
screen may be delayed by one frame.
(Continued)
5-1
Chapter 5 Menu System