Fujitsu ETERNUS DX S4 Series Configuration Manual page 29

Chapter 11 Creating the Volumes
11.1 Creating the Volume Groups
(4)
[Add a Volume Group]
The [Add a Volume Group] window will appear.
3
Specify the following items.
• Specify any name for the [VOLUME GROUP name].
• Be sure to specify the [PHYSICAL VOLUME names].
4
After the settings are complete, exit the "smit" command.
5
Check the contents of the new volume group.
Use the "lsvg" command to discover the number of physical partitions (the "Total PPs" value). This is
required in
raid_vg2
raid_vg3
raid_vg4
raid_vg5
# lsvg raid_vg6
VOLUME GROUP:
VG STATE:
VG PERMISSION:
MAX LVs:
LVs:
OPEN LVs:
TOTAL PVs:
STALE PVs:
AVTIVE PVs:
MAX PPs per PV:
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX
"11.2 Creating the Logical Volumes" (page
raid_vg6
active
read/write
256 FREE pps:
2 USED PPs:
2
2
0
1
16256
Copyright 2018 FUJITSU LIMITED
30).
VG IDENTIFIER: 000972ca57abbe2b
PP SIZE: 4 megabyte(s)
TOTAL PPs: 511 (2044 megabytes)
10 (40 megabytes)
501 (2004 megabytes)
QUORUM:
VG DESCRIPTORES:
STALE PPs:
AUTO ON:
MAX PVs:
29
2
2
0
yes
2
P3AM-3782-23ENZ0