Graco True Focus 2V00 Owner's Manual page 13

Setting Up the Baby Monitor
NOTE: It is very important that the steps below be
followed for first time power-up.
● Place the Nursery Unit within 10 feet (3 meters) of your
baby. Plug an AC adapter into the jack on the back of the
Nursery Unit. Plug it into a working 120 volt AC outlet.
● Point the Nursery Unit toward your baby.
10
11
12
Place the Parent Unit within five
(5) feet (1.5 meters) of the
Nursery Unit and turn on the
Parent Unit using the On/Off
button on right side of the LCD
screen.
Depress button for 1 sec. to turn
camera on.
Within a few seconds, the
Parent Unit will lock on to the
Nursery Unit.
A second later, you will hear a
series of beeps and the
connection light
on. Your monitor is now ready
for use.
13
will turn