Table 4-41 Interfaces Switchport Statistics - SMC Networks TigerSwitch Management Manual

24-port 10/100mbps stackable managed switch
Hide thumbs Also See for TigerSwitch:
Table of Contents

Advertisement

C
L
OMMAND
INE
Field
Broadcast threshold Shows if broadcast storm suppression is enabled or disabled;
Lacp status
Ingress/Egress rate
limit
VLAN membership
mode
Ingress rule
Acceptable frame
type
Native VLAN
Priority for
untagged traffic
Gvrp status
Allowed Vlan
Forbidden Vlan
Private VLAN
mode
Private VLAN
host-association
Private VLAN
mapping
4-158
I
NTERFACE

Table 4-41 Interfaces Switchport Statistics

Description
if enabled it also shows the threshold level (page 4-152).
Shows if Link Aggregation Control Protocol has been
enabled or disabled (page 4-167).
Shows if rate limiting is enabled, and the current rate limit.
(page 4-162).
Indicates membership mode as Trunk or Hybrid (page
4-202).
Shows if ingress filtering is enabled or disabled (page 4-204).
Shows if acceptable VLAN frames include all types or tagged
frames only (page 4-203).
Indicates the default Port VLAN ID (page 4-205).
Indicates the default priority for untagged frames (page
4-222).
Shows if GARP VLAN Registration Protocol is enabled or
disabled (page 4-218).
Shows the VLANs this interface has joined, where "(u)"
indicates untagged and "(t)" indicates tagged (page 4-206).
Shows the VLANs this interface can not dynamically join via
GVRP (page 4-207).
Shows the private VLAN mode as host, promiscuous, or
none (4-213).
Shows the secondary (or community) VLAN with which this
port is associated (4-214).
Shows the primary VLAN mapping for a promiscuous port
(4-214).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tigerswitch smc6224m

Table of Contents