Controls On The Tv/Installation - Camec RV Media Evolution 044694 Instruction Manual

CONTROLS ON THE TV TV CONTROLS
8. INPUT - This button switches between all the different sources of the TV. When the OSD is active,
this button acts as the enter button and confirms the menu selection.
7. MENU - This button activates the OSD menu. If a sub-menu is active, pressing this button will return
selection to the previous menu level.
5. CH(+) - This button changes the TV channel upward. If the OSD menu is active, this button functions
as up control for the menu.
6. CH(-) - This button changes the TV channel down. If the OSD menu is active, this button functions as
down control for the menu.
3. VOL(+) - This button increases the TV's volume. If the On Screen Display (OSD) menu is active,
pressing this button will move the selection to the right.
4. VOL(-) - This button decreases the TV's volume. If the OSD menu is active, pressing this button will
move the selection to the left.
9. POWER ( ) - Turn on the TV by pressing the button once. Press the button again to turn off the TV.
INSTALLATION
Wall-Mounting
NOTES: The distance between the holes is 200mm in width and 100mm in height.
If you are using a standard VESA 100 x 100 RV TV wall bracket, you will need
a 200 to 100mm converter bracket such as the TV Media 100 x 100 to
200 x 100 adaptor P/N 043042.
It is recommended that this TV be removed
from the wall bracket when the RV is in transit.
6