Table of Contents
Advertisement
Setting a new master password
Enter old master
password
(default: 0000)
then press <OK>
NOTE: The master password is for programming the ASUS
DL101 only and cannot be used to unlock.
Setting a new user password
Enter master
password
(default: 0000)
then press <OK>
Setting a new user card
Enter master
password
(default: 0000)
then press <OK>
NOTE:
• Take note of the slot your user card is shown on the panel
• The ASUS DL101 supports MIFARE, Felica sensor cards.
• Refer to Setting a new NFC-enabled Android phone section for
E12914_DL101_UM_V3.indd 26
Press <1> then
press <OK>
Press <2> then
press <OK>
Press <2> then
press <OK>
when adding a new user card, this will help you delete the
correct slot in the future.
more details.
Enter new master
password (four
to eight digits)
then press <OK>
Enter a new user
password (four
to eight digits)
then press <OK>
Touch the panel
with your user
card then press
<OK>
26
The panel will
repeat the
user password
sequentially then
press <OK>
The panel will
show the slot
number this card
occupies then
press <OK>
5/24/2017 18:00:12
Advertisement
Table of Contents
