Optional Redundant Power Unit; Power Supply Receptacles; Features And Benefits; Connectivity - SMC Networks SMC TigerCard 10G Installation Manual

A T
BOUT THE IGER

Optional Redundant Power Unit

SMC supports an optional Redundant Power Unit (RPU), that can supply
power to the switch in the event of failure of the internal power supply.

Power Supply Receptacles

There are two power receptacles on the rear panel of each switch. The
standard power receptacle is for the AC power cord. The receptacle
labeled "RPU" is for the optional Redundant Power Unit (RPU).

Features and Benefits

Connectivity

• 24 or 48 dual-speed ports for easy Gigabit Ethernet integration and for
protection of your investment in legacy LAN equipment.
• Auto-negotiation enables each RJ-45 port to automatically select the
optimum communication mode (half or full duplex) if this feature is
supported by the attached device; otherwise the port can be configured
manually.
• RJ-45 10/100/1000BASE-T ports with auto MDI/MDI-X pinout
selection.
• Unshielded (UTP) cable supported on all RJ-45 ports: Category 3 or
better for 10 Mbps connections, Category 5 or better for 100 Mbps
connections, and Category 5, 5e, 6 or better for 1000 Mbps
connections.
1-8
S 10G
TACK
Power Socket
100-240V~
50-60Hz 2A

Figure 1-5 Power Supply Receptacles

Redundant Power Connector
RPU
DC
12V 13A
M 1