Page 1
Smart Deactivator Manual UL manual smart deactivator according to ul regulations • SMART DEAC Mounting • SMART DEAC Wiring • Appendix 1 : Quick Reference...
Page 2
DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED NEDAP SERVICE PERSONNEL. This European Standard specifies a marking • of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/ EC (WEEE);...
N.V. Nederlandsche Apparatenfabriek “Nedap”, hereafter called “Nedap”, is manufacturer of one of the most reliable and scalable EAS Systems in the market today. With a Nedap EAS system you are able to reduce shoplifting costs to a minimum in combination with Nedap’s tagging solutions.
• Check the functionality; by deactivating a RF label above the antenna and check it for a audio signal. • Call Nedap EAS Support for quick hands-on problem solution in case of unforeseen trouble (see Technical Support on page 2)
Installation instructions The SMART DEAC electronics unit must be powered with a NEC class2 type power source like the NEDAP AC/DC power adapter 100~240Vac/12V dc NEDAP part number 9651802. Always place the unit near a power outlet (less than 1 meter / 3.3 feet ), the power outlet should be easily accessible, also after installation.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult your local Nedap Business Partner or - Consult the dealer of the radio communication device(s) or an experienced radio/TV technician for help.