Connect A Printer; Connecting The Power Adapter - SMC Networks Barricade SMC7004ABR User Manual

Note: When connecting to the WAN port, use 100-ohm Category
3, 4 or 5 shielded or unshielded twisted-pair cable with
RJ-45 connectors at both ends for all connections.

Connect a Printer

If you connect a printer to the Barricade, all the computer users
connected to your LAN can have access to this printer. Connect a
standard parallel printer cable to the Printer port on the Barricade,
and configure the printer server as described on page 6-1.

Connecting the Power Adapter

Plug the power adapter into the power socket on the Barricade,
and the other end into a power outlet. Check the indicator marked
Power on the front panel to be sure it is on. If the Power indicator
does not light up, refer to Troubleshooting in Appendix A.
I
NSTALLATION
2-9