Section 5 | Configure - SMC Networks EZ Connect SMC2670W User Manual

Section 5 | Configure

The EZ Connect Wireless Ethernet Adapter functions as a trans-
parent device on your network by not requiring an IP address
that is within the same subnet as your network. The steps out-
lined below will guide you through the wireless settings and
TCP/IP configuration.
Note: If you are using a Barricade Wireless Broadband Router
or running a DHCP server with an IP address of
192.168.2.XXX, there should be no configuration
required on the SMC2670W.
5.1 | Configure the Wireless Ethernet Adapter
using Windows-based Utility
1. Log into the SMC2670W using the Windows-based Utility.
(see section 4.1 for more information)
2. When you log into the Windows-based Utility, the "INFO"
page displays. To change your settings click the [SETUP >]
button.
23