SMC Networks EZ Connect SMC2662W-AR User Manual page 4

4. Set the "Channel" to the same radio channel as that used
by the other wireless clients in your group. However, if you
are connecting to a network via an access point, the
adapter will automatically set the channel to be the same
as that used by the Access Point.
5. For more secure data transmission, set the "Encryption" to
"128-bit" or "64-bit" to ensure wireless network security.
The advance Wired Equivalent Privacy (WEP) is implemented
in this card to prevent unauthorized access. The 128-bit
setting gives a higher level of security but the setting must
be the same for all clients in your wireless network.
(Default: Disabled) To completely configure WEP, you must
use the Configuration Utility. Please see "Encryption Screen"
under the "Configuration and Diagnostic Utility" section.
5
6. Set the "Fragmentation Threshold". (The Default is 2346
which means "Disabled")
7. Set the "Operating Model" to "802.11 Ad-Hoc" or
"Infrastructure" depending on the type of network you want
to connect to.
6