Table of Contents
Related Manuals for LG 55LA9650-CA
Summary of Contents for LG 55LA9650-CA
- Page 1 OWNER’S MANUAL LED TV* * LG LED TV refers to an LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 55LA9650 55LA9700 84LA9800 65LA9650 65LA9700 www.lg.com...
- Page 2 SAFETY INSTRUCTIONS SafEty INStructIoNS Please read these safety precautions carefully before using the product. Bend antenna cable between inside WARNING and outside building to prevent rain from flowing in. This may cause Do not place the TV and/or water damaged inside the Product remote control in the following and could give an electric shock.
- Page 3 SAFETY INSTRUCTIONS Do not drop metallic objects such CAUTION as coins, hair pins, chopsticks or wire into the product, or Install the product where no inflammable objects such as paper radio wave occurs. and matches. Children must pay particular attention. Electrical shock, fire or injury can occur.
- Page 4 SAFETY INSTRUCTIONS Signal from Remote Control can Do not press strongly upon the be interrupted due to external/ panel with a hand or sharp object internal lighting eg Sunlight, such as nail, pencil or pen, or fluorescent lighting. If this make a scratch on it, as it may occurs turn off lighting or darken cause damage to screen.
- Page 5 SAFETY INSTRUCTIONS Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been Displaying a still image (e.g., broadcasting channel exposed to rain or moisture, does...
- Page 6 3D content. Cautions when using the 3D glasses Make sure to use LG 3D glasses. Symptoms which require discontinuation or Otherwise, you may not be able to view refraining from watching 3D content 3D videos properly.
- Page 7 In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to ‘opensource@lge.com’.
-
Page 8: Table Of Contents
TABLE OF CONTENTS taBLE of coNtENtS SafEty INStructIoNS MaGIc rEMotE coNtroL fuNctIoNS Viewing 3D Imaging Registering Magic Remote Control How to use Magic Remote Control Precautions to Take when Using the Magic LIcENSES Remote Control oPEN SourcE SoftWarE NotIcE rEMotE coNtroL taBLE of coNtENtS uSING tHE uSEr GuIdE INStaLLatIoN ProcEdurE... -
Page 9: Installation Procedure
INSTALATION PROCEDURE / ASSEMBLING AND PREPARING INStaLLatIoN ProcEdurE Open the package and make sure all the accessories are included. Attach the stand to the TV set. Connect an external device to the TV set. Make sure the network connection is available. You can use the TV network functions only when the network connection is made. - Page 10 ASSEMBLING AND PREPARING ENERGY AV MODE INPUT SAVING FLASHBK LIST MARK MUTE INFO MENU Q.MENU ENTER BACK EXIT L/R SELECT FREEZE RATIO Magic Remote Control, Remote control and Owner’s Manual Batteries (AA) Batteries (AAA) (See p. 37) (See p. 39) (For 84LA9800) (For 55LA9700, 55/65LA9650) Cable Holder...
- Page 11 ASSEMBLING AND PREPARING (For 55/65LA9700) Tag On Wall Mount Inner Spacers Cinema 3D Glasses Tag On 4 EA The number of 3D glasses (Depending on model) (See p. 23) may differ depending on the model or country. (For 65LA9700) (For 55LA9700) Wall Mount Screws Wall Mount Screws 4 EA, M6 x 54...
-
Page 12: Optional Extras
The model name or design may be changed due to the manufacturer’s circumstances or policies. AN-MR400 AG-F*** AG-F***DP Magic Remote Cinema 3D Glasses Dual Play Glasses Tag On LG Audio device Tag On AN-VC5** Video Call Camera Wall mount bracket Wall mount bracket AN-BL*** Wireless IR Blaster... -
Page 13: Parts And Buttons
ASSEMBLING AND PREPARING Parts and Buttons (For LA9650 Series) Screen SETTINGS INPUT Speakers Buttons Remote control sensor Power Indicator Button Description Scrolls through the saved channels. Adjusts the volume level. Selects the highlighted menu option or confirms an input. (OK ) Accesses the main menus, or saves your input and exits the menus. - Page 14 ASSEMBLING AND PREPARING (For LA9700 Series) Video call camera Screen SETTINGS INPUT Speakers Buttons Remote control sensor Power Indicator Button Description Scrolls through the saved channels. Adjusts the volume level. Selects the highlighted menu option or confirms an input. (OK ) Accesses the main menus, or saves your input and exits the menus.
- Page 15 ASSEMBLING AND PREPARING (For 84LA9800) Screen SETTINGS INPUT Remote control sensor Buttons Speakers Logo light Button Description Scrolls through the saved channels. Adjusts the volume level. Selects the highlighted menu option or confirms an input. (OK ) Accesses the main menus, or saves your input and exits the menus. (SETTINGS) Changes the input source.
-
Page 16: Lifting And Moving The Tv
ASSEMBLING AND PREPARING Lifting and Moving the TV When transporting a large TV, there should be at least 2 people. When transporting the TV by hand, hold the When moving or lifting the TV, read the following TV as shown in the following illustration. to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. -
Page 17: Setting Up The Tv
ASSEMBLING AND PREPARING Setting up the TV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture. Attaching the Stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. CAUTION When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. - Page 18 ASSEMBLING AND PREPARING (For LA9700 Series) Front Stand Base M4 x 14 M4 x 14 2 EA 2 EA NOTE The stand screws are already attached at the back of the TV. Please use these attached screw to assemble the TV and stand.
- Page 19 ASSEMBLING AND PREPARING (For 84LA9800) Front Stand Body Stand Base M4 x 20 4 EA Front M5 x 16 6 EA...
-
Page 20: Mounting On A Table
ASSEMBLING AND PREPARING Mounting on a Table Adjusting the angle of the TV to suit view Swivel 7 degrees to the left or right and adjust Lift and tilt the TV into its upright position on the angle of the TV to suit your view. a table. -
Page 21: Tidying Cables
ASSEMBLING AND PREPARING Securing the TV to a wall (optional) Tidying Cables (Depending on model) (For LA9650 Series) Gather and bind the cables with the cable holder on the back of the TV. Insert and tighten the eye-bolts, or TV Cable Holder brackets and bolts on the back of the TV. -
Page 22: Mounting On A Wall
If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall Cable mount. Management... - Page 23 400 x 400 may occur. If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified Standard screw personnel.
-
Page 24: Using Sliding Speaker
ASSEMBLING AND PREPARING Using Built-in Camera Using Sliding Speaker (For LA9700 Series) (For LA9700 Series) This TV does not support the use of an external camera. NOTE Before using the built-in camera, you must recognize the fact that you are legally responsible for the use or misuse of the camera by the relevant national laws including the criminal law. -
Page 25: Preparing Built-In Camera
ASSEMBLING AND PREPARING Preparing Built-in Camera Pull down the built-in camera when you are not using it. Pull up the built-in camera at the back of the TV. Name of Parts for the Built-In Camera Microphone Indicator Camera Lens NOTE Remove the protective film before using the built-in camera. -
Page 26: Making Connections
MAKING CONNECTIONS MaKING coNNEctIoNS This section uses illustrations of the LA9700 series. You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. -
Page 27: Connecting To A Hd Receiver, Dvd Player, Or Vcr
MAKING CONNECTIONS Connecting to a HD Receiver, DVD Player, or VCR Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. -
Page 28: Dvi To Hdmi Connection
MAKING CONNECTIONS DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. -
Page 29: Connecting To A Mobile Phone
MAKING CONNECTIONS Connecting to a Mobile Phone Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets. NOTE Connect the mobile phone to the HDMI IN 3 (MHL) port to view the phone screen on the TV. This only works for the MHL-enabled phone. -
Page 30: Component Connection
MAKING CONNECTIONS Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. NOTE If cables are installed incorrectly, it could cause the image to display in black and white or with distorted color. -
Page 31: Composite Connection
MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE Check to ensure the cables are matched with the corresponding color connection. COMPONENT VIDEO AUDIO YELLOW... -
Page 32: Connecting To A Pc
MAKING CONNECTIONS Connecting to a PC NOTE It is recommended to use an HDMI connection for the best image quality. Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. - Page 33 MAKING CONNECTIONS Method B: dvI to HdMI connection Choose any HDMI input port to connect. It does not matter which port you use. (*Not Provided) YELLOW (*Not Provided) AUDIO OUT DVI OUT...
-
Page 34: Connecting To An Audio System
MAKING CONNECTIONS Connecting to an Audio System You can use an optional external audio system instead of the built-in speaker. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration. -
Page 35: Connecting Headphones
MAKING CONNECTIONS Connecting Headphones You listen to the sound using headphones. NOTE AUDIO menu options are disabled when headphones are connected. When changing AV MODE with headphones connected, the change is applied to video but not to audio. Optical Digital Audio Out is not available when headphones are connected. Headphone impedance: 16 Ω... -
Page 36: Connecting A Usb Drive
MAKING CONNECTIONS Connecting a USB Drive Connect a USB storage device such as a USB flash thumbdrive, external hard drive, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. NOTE Some USB Hubs may not work. -
Page 37: Magic Remote Control Functions
MAGIC REMOTE CONTROL FUNCTIONS MaGIc rEMotE coNtroL fuNctIoNS When the message “Magic remote control battery is low. Change the battery.” is displayed, replace the battery. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching ends to the label inside the compartment, and close the battery cover. -
Page 38: Registering Magic Remote Control
MAGIC REMOTE CONTROL FUNCTIONS Registering Magic Remote Control The Magic Remote Control operates by pairing with your TV. How to register the Magic Remote Control To register automatically, turn the Wheel (OK). TV on and press the When registration is completed, the completion message appears on the screen. -
Page 39: Remote Control
REMOTE CONTROL rEMotE coNtroL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover. - Page 40 REMOTE CONTROL INFO Views the information of the current program and screen. SMART Accesses the Smart Home menu. RATIO INPUT MY APPS Shows the list of Apps. Navigation buttons (up/down/left/right) Scrolls through menus or options. OK ꔉ Selects menus or options and confirms your input. ꕣ...
-
Page 41: Using The User Guide
You can use ꕌ/ꕍ to move between pages. Allows to browse the description of the function you want from the index. Provides the detailed information on the functions of LG Smart TV when the Internet is connected. (It may not be available depending on the country/language.) User Guide OPTION >... -
Page 42: Specifications
Storage Humidity Less than 85 % For the power supply and power consumption, refer to the label attached to the product. 55LA9650 MODELS (55LA9650-CA) With stand 1234 x 790 x 261 (mm) Dimensions (Width x Height x Depth) Without stand 1234 x 755 x 41.9 (mm) - Page 43 SPECIFICATIONS 55LA9700 MODELS (55LA9700-CA) With stand 1230 x 781 x 274 (mm) Dimensions (Width x Height x Depth) Without stand 1230 x 714 (*743) x 40.2 (mm) With stand 31 Kg Weight Without stand 27.9 Kg Power requirement AC 100-240 V~ 50 / 60 Hz 65LA9700 MODELS (65LA9700-CA)
- Page 44 SPECIFICATIONS HDMI (DTV) supported mode Component port connecting information Horizontal Vertical Component ports on the Resolution Frequency (kHz) Frequency (Hz) 31.469 59.94 640 x 480 31.5 31.47 59.94 Video output ports 31.5 60.0 720 x 480 on DVD player 15.73 59.94 15.75 60.0...
- Page 45 SPECIFICATIONS 3D supported mode 3D supported mode manually Signal Horizontal Verticla Input Playable 3D video format Resolution Frequency Frequency (kHz) (Hz) HD / SD ATV(CVBS) Component HD / SD 2D to 3D, Side by Side(Half), Top & Bottom 1024 x 768 48.36 1360 x 768 47.71...
- Page 46 SPECIFICATIONS 3D supported mode manually Signal Horizontal Verticla Input Playable 3D video format Resolution Frequency Frequency (kHz) (Hz) Under 704 x 480 2D to 3D Over 704 x 480 2D to 3D, Side by Side(Half), Top & Bottom interlaced 2D to 3D, Side by Side(Half), Top & USB ,DLNA 50 / 60 Bottom,Checker Board, Frame Sequential,...
-
Page 47: External Control Device Setup
Top & Bottom, Side by Side(Half) 67.432 / 67.5 59.94 / 60 1080p 33.75 Side by Side(Half), Top & Bottom, Checker Board, MPO(Photo), JPS(Photo) DLNA 1080p 33.75 ExtErNaL coNtroL dEvIcE SEtuP To obtain the external control device setup information, please visit www.lg.com. -
Page 48: Maintenance
MAINTENANCE / TROUBLESHOOTING MaINtENaNcE Cleaning Your TV Clean your TV regularly to keep it at peak performance and to extend the product lifespan. CAUTION Make sure to turn the power off and disconnect the power cord and all other cables first. When the TV is left unattended or unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. - Page 50 The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. MODEL SERIAL...
- Page 51 OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...
-
Page 52: Note
KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button Q.Menu R/C Button CH -, PR - R/C Button List, - (ATSC Only) R/C Button Volume + R/C Button... -
Page 53: Image Shown May Differ From Your Tv
(TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals. - Page 54 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) RS-232C with RS-232C Cable (Legacy) RS-232C IN Phone jack Type (CONTROL & SERVICE) (PC) (TV) • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and RS-232C IN (CONTROL &...
- Page 55 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
- Page 56 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
- Page 57 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute ► To control Power Off of the set. on, TV will not display OSD.
- Page 58 EXTERNAL CONTROL DEVICE SETUP 09. Tint (Command: k j) 14. Color(Colour) Temperature (Command: x u) ► To adjust the screen tint. ► To adjust colour temperature. You can also adjust You can also adjust tint in the PICTURE menu. Color(Colour) Temperature in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Transmission [x][u][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64...
- Page 59 EXTERNAL CONTROL DEVICE SETUP * Digital Terrestrial/Cable/Satellite Data 05: Input Source (Analogue) - 00 : Terrestrial TV (ATV) [Data 00][Data 01]: Channel Data - 01 : Cable TV (CATV) Data 00 : High Channel data * Digital Terrestrial/Cable Data 01 : Low Channel data - 00 00 ~ 27 0F (Decimal: 0 ~ 9999) Data 00 : xx (Don't care) Data 02 : Input Source (Digital)
- Page 60 EXTERNAL CONTROL DEVICE SETUP [Data 01][Data 02]: Major Channel Number 20. Control Back Light (Command: m g) Data 01: High byte Channel Data • For LCD TV / LED TV Data 02: Low byte Channel Data ► To control the back light. - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) Transmission [m][g][ ][Set ID][ ][Data][Cr] [Data 03][Data 04]: Minor/Branch Channel Number...
- Page 61 11 11 EXTERNAL CONTROL DEVICE SETUP 22. 3D(Command: x t) (only 3D models) 23. Extended 3D(Command: x v) (only 3D models) (Depending on model) (Depending on model) ► To change 3D option for TV. ► To change 3D mode for TV. Transmission [x][v][ ][Set ID][ ][Data 00][ ] Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01] [Data 01][Cr]...