JVC KD-SV203 Service Manual page 8

QQ
3 7 63 1515 0
3.1.7 Removing the Sub board
(See Fig. 7)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, side panel, bottom
cover, rear bracket and main board.
(1) Remove the five screws H attaching the Sub board.
(2) Disconnect the card wire from the connector
Sub board.
(3) Move the Sub board in the direction of the arrow to release
it from the joint f.
3.1.8 Removing the CD mechanism assembly
(See Fig. 8)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, side panel, bottom
cover, rear bracket, main board and Sub board.
(1) Remove the three screws J attaching the top chassis.
(2) Take out the CD mechanism assembly.
TE
L 13942296513
www
.
1-8 (No.49878)
http://www.xiaoyu163.com
CN601 on the
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Joint f
CN601
Card wire
Sub board
Q Q
3 6 7 1 3 1 5
CD mechanism assembly
co
.
9 4 2 8
H
Top chassis
H
Fig.7
J
0 5 8 2 9 9 4 2 8
Top chassis
J
Fig.8
m
9 9
9 9