Winterizing Or Draining The Tank; Troubleshooting - Kohler K-4108 User Manual

Bidet seat with remote control
Hide thumbs Also See for K-4108:
Table of Contents

Advertisement

Available languages

Available languages

JOBNAME: No Job Name PAGE: 18 SESS: 17 OUTPUT: Tue Apr 29 07:42:31 2014

Winterizing or Draining the Tank

Turn off the water supply and unplug the unit.
Remove the bidet seat from the toilet. Refer to the "Remove the
Seat" section.
Use a coin to rotate the drain plug counterclockwise 1/4 turn.
Remove the drain plug.
Drain the water from the seat.
Reinstall the drain plug.
Reinstall the bidet seat if desired, but do not turn on the water if
winterizing. The bidet seat will not operate correctly until the
water supply has been turned back on.
If the bidet seat is reinstalled prior to turning the water on, attach
a note to the bidet seat indicating the water supply is turned off.

Troubleshooting

This troubleshooting guide is for general aid only. A Kohler Authorized
Service Representative or qualified electrician should correct any
electrical problems.
For warranty service, contact the Customer Care Center using the
numbers located on the back page of this manual.
1194356-5-A
Remove the plug with a coin.
18
Kohler Co.

Advertisement

Table of Contents
loading

Table of Contents