Auto-Reconnect; Volume Control; Calling; Answering A Call - LG HBM-W600 User Manual

Auto-Reconnect

- If the HBM-W600 is turned off (either accidentally or intentionally) while connected,
the headset will disconnect from the device.
The headset and handset will automatically reconnect when the HBM-W600 is
turned back on (provided that both devices are within the required range of 33 feet
(10 meters).
Out of range
- When the connected device and the HBM-W600 are separated by a range of
33 feet (10 meters) or more, the headset will alert the user with a beep, and the
headset and device will disconnect.
- When the device and the HBM-W600 are within the required range again, the
HBM-W600 will automatically reconnect to the device.
- If the headset and device do not automatically reconnect when they are back within
the required range, briefly press the POWER/CALL button on the HBM-W600 to
reconnect manually.
- While trying to reconnect, your headset will beep and the LED indicator will flicker
twice every 5 seconds.
- If the headset does not reconnect within 60 minutes, it will turn off.

Volume Control

- Press the VOLUME UP or VOLUME DOWN button to adjust the speaker volume.
- There are eight levels of speaker volume.
- To avoid hearing loss at high volume, HBM-W600 will play a warning tone when the
volume is raised into the upper 3 levels.

Calling

Answering a call

- When there is an incoming call, the headset will ring.
- Briefly press and release the POWER/CALL button to answer the incoming call.

Making a call

- If you make a call from the connected handset, the call will (depending on the phone
settings) automatically transfer to the headset. If the call is not automatically transferred,
you can manually transfer the call by briefly pressing the POWER/CALL button on the
HBM-W600 (handset and headset must be paired).
How to Use
7