Establishing The Connection Between Drivemonitor And The Device; Setting The Uss Interface - Siemens Simovert Masterdrives Operating Instructions Manual
Motion control, frequency converter ac-ac compact type a-d
Hide thumbs
Also See for Simovert Masterdrives:
- Compendium (1547 pages) ,
- Manual (1501 pages) ,
- Operating instructions manual (359 pages)
Table of Contents
Advertisement
Available languages
Available languages
08.2009
RS485 interface
8.5.2
Establishing the connection between DriveMonitor and the device
8.5.2.1
Setting the USS interface
Siemens Controls
Siemens AG
6SE7087-6JD50
SIMOVERT MASTERDRIVES
The RS485 interface is multi-point capable and therefore suitable for
bus operation. You can use it to connect 31 SIMOVERT
MASTERDRIVES with a PC. On the PC, either an integrated RS485
interface or an RS232 ↔ RS485 interface converter is necessary. On
the device, an RS485 interface is integrated into the -X300 (compact
PLUS -X103) connection. For the cable: see pin assignment -X300 and
device documentation of the interface converter.
You can configure the interface with menu Tools
Fig. 8-6
Online settings
Operating Instructions
Parameterization
ONLINE Settings.
8-15
Advertisement
Chapters
Table of Contents
