5.2 Connecting to Wi-Fi™
Connection is possible under conditions in which an Internet connection using Wi-Fi™ is
possible, and the Wi-Fi™ setting for the device is on.
5.2.1 Turning Wi-Fi™ on
1. Select the
2. Select the
3. Select
4. Turn the Wi-Fi™ setting on.
5. Available networks are displayed.
6. Select a desired network.
Note!
5.2.2 Adding a network
To connect to a network except for the public Wi-Fi™ area, a network needs to be added
manually. By adding the network, the security cer i cation information of the network is
recorded, and automatic connec ion is possible when entering an available area. A maximum of
20 networks can be stored.
1. Turn on Wi-Fi™ if it is off.
2. Select
3. Select
4. Input a network name (SSID) and select
5. Select
6. Select a security type.
7. Select
8. Input the password then select
9. Select
Note!
icon on the home screen and display the Settings screen.
tab.
or
•
When the connection to a Wi-Fi™ network is successful, the
is displayed.
•
If there is no available network when connecting to Wi-Fi™ for the
rst time, you need to rst add a network.
•
When entering in a network area previously connected to, re-
connection to the network is automatic.
•
The
icon is displayed on the network name currently connected.
•
The network name and its security type, and the radio wave
reception level are displayed.
•
If the connection to a network is lost, connection to another available
network is automatic.
.
. The keyboard screen is displayed.
.
. The keyboard screen is displayed.
.
to connect to the network.
•
If "None" is selected during the security type selection, the password
cannot be input.
•
If 20 networks have already been stored and another network is
newly stored, the oldes network (oldest access) is deleted.
.
.
64
icon