Advertisement
1. Input/Output Voltage Meter: Displays input
or output voltage.
2. Voltage Correction Meter: Continuously displays
the amount of voltage being increased or reduced
to maintain 120 volts.
3. Current Usage Meter: Displays current draw.
4. Ground OK LED: Indicates the wall outlet
that AVS 2000 is plugged into is properly grounded.
5. Surge Protected LED: Indicates AVS 2000's internal
surge protection is active.
6. Line and Neutral OK LED: Indicates the wall outlet
that AVS 2000 plugged into is properly wired.
7. Normal Voltage Condition: Indicates input voltage
4
7
AVS 2000 – FRONT PANEL
10. Sequential Power On/Off Button: Press to provide
11. Input Voltage/Readout Illumination: Adjusts
1
2
8
10
1 1
is between 80 and 140 volts.
8. Switched Outlets On LED: Indicates components
plugged into the "switched" outlets will receive
power when the ON button is pressed.
9. Abnormal Voltage Condition: Indicates input
voltage has dropped below 80 volts or has risen
above 140 volts or that the system is waiting
for stabilization.
AC power to switched outlets.
the illumination level of the LED meters (depress and hold).
Toggles input/output voltage meter (depress and release).
5
3
6
9
Figure 1
Advertisement
