Example 5:Generate A Noise Wave - Teledyne T3AFG5 Series User Manual

3.5. Example 5:Generate a Noise Wave

Generate a noise waveform with 2V stdev and 1 V mean.
��Steps:
��Set the stdev
1. Press Noise →Stdev.
2. Input '10' from the keyboard and choose the unit 'mV'. The amplitude is
set to be 10 mV.
��Set the mean
1. Press Mean.
2. Input '5' from the keyboard and choose the unit 'mV'. The offset is set to
be 5 mV.
When the amplitude and offset are set, the wave generated is shown in
Figure 3- 5
Figure 3- 5 Noise Waveform
92