Advertisement
Available languages
Available languages
OBJ_BUCH-1125-005.book Page 9 Friday, February 26, 2016 11:29 AM
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for cutting, roughing and brushing of
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Spindle lock button
2 Vibration damper
3 On/Off switch
Technical Data
Angle Grinder
Article number
Rated power input
Output power
Rated speed
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder spindle
Kickback stop
Restarting Protection
Reduced starting current
Rotatable main handle
Weight according to EPTA-Procedure 01:2014
– with vibration-damping auxiliary handle
– with standard-auxiliary handle
Protection class
Bosch Power Tools
4 Auxiliary handle (insulated gripping surface)
5 Grinder spindle
6 Protection guard for grinding
7 Encoding key
8 Clamping lever for protection guard
9 Screw for adjustment of protection guard
10 Supporting disc
11 Straight grinding disc*
12 Offset grinding disc*
13 Clamping nut
14 Protection guard for cutting*
15 Mounting flange with O-ring
16 Cutting disc*
17 Clamping nut
18 Quick-clamping nut
19 Hand guard*
20 Spacer discs*
21 Rubber sanding plate*
22 Sanding sheet*
23 Round nut*
24 Cup brush*
25 Cutting guide with dust extraction protection guard *
26 Diamond cutting disc*
27 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GWS ...
22-180
22-230
LV
3 601 ...
H90 E..
H91 E..
W
2200
2200
W
1500
1500
-1
min
8500
6600
mm
180
230
M 14
M 14
mm
25
–
–
–
–
kg
5.2
5.3
kg
5.1
5.2
/II
English | 9
*
24-180
24-180
LV
LV
LV
H92 E..
H92 G..
2400
2400
1600
1600
8500
8500
180
180
M 14
M 14
25
25
25
–
–
–
–
–
–
–
–
–
–
–
5.2
5.3
5.1
5.2
/II
/II
/II
1 609 92A 2CA | (26.2.16)
Advertisement
