Page 5
ZHONG 6738 User Manual FCC - PART 68 This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US: 6RTDL01B6738. If requested, this number must be provided to the telephone company.
Page 6
ZHONG 6738 User Manual Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. IC Statement This product meets the applicable Industry Canada technical specifications. / Le présent matériel est conforme aux specifications techniques applicables d’Industrie Canada.
ZHONG 6738 User Manual Safety Precautions Read the following information carefully before operating the device. Please follow the following precaution items to protect the device from risks and damage caused by fire and electric power: Use volume labels to mark the type of power.
ZHONG 6738 User Manual Overview The Zhone 6738 provides wireless LAN and USB services. It is designed to provide a simple and cost-effective xDSL Internet connection for a private Ethernet and 802.11b/802.11g/802.11n wireless network. The Router combines high-speed xDSL Internet connection, Ethernet uplink, IP routing for the LAN and wireless connectivity in one package.
ZHONG 6738 User Manual USB storage 3G WAN service 2.2 Features User-friendly GUI for web configuration Several pre-configured popular games. Just enable the game and the port settings are automatically configured. Compatible with all standard Internet applications Industry standard and interoperable DSL interface...
ZHONG 6738 User Manual TR-069 WAN management protocol Simple Network Management Protocol (SNMP) Remote update System statistics and monitoring DSL router is targeted at the following platforms: DSL modems, wireless access points and bridge. 2.3 Standards Compatibility and Compliance Support application level gateway (ALG) ITU G.992.1 (G.dmt)
ZHONG 6738 User Manual Hardware Description and Installation Note: The figures in this document are for reference only. 3.1 Hardware Description 3.1.1 Front Panel Figure 1 Front panel The following table describes the indicators on the front panel. Indicator Color...
ZHONG 6738 User Manual Indicator Color Status Description 1/2/3/4 Data is being transmitted through the Ethernet Blinking interface. The Ethernet link is disconnected. The WLAN is enabled. Data is being transmitted through the wireless WLAN Green Blinking interface. WLAN is disabled.
ZHONG 6738 User Manual Figure 3 Side Figure 2 Rear panel panel The following table describes the interfaces and the buttons. Interface Description RJ-11 port. Connect the router to DSL connector or splitter through telephone cable. RJ-45 port, for connecting the router to a PC or another network LAN 4~1 device.
ZHONG 6738 User Manual 3.2.1 Choosing the Best Location for Wireless Operation Many environmental factors may affect the effective wireless function of the DSL Router. If this is the first time that you set up a wireless network device, read the...
Page 15
ZHONG 6738 User Manual Figure 4 Connecting the DSL router Note: If you use 3G WAN service, connect the 3G USB data card to the USB port of the router. If you use the Ethernet uplink, connect the WAN interface that is defined to the Internet with Ethernet cable.
ZHONG 6738 User Manual PC Network Configuration and Login 4.1 PC Network Configuration Each network interface on the PC should either be configured with a statically defined IP address and DNS address, or be instructed to automatically obtain an IP address using the network DHCP server.
Page 17
ZHONG 6738 User Manual Figure 5 IP and DNS configuration TCP/IP configuration steps for Windows XP are as follows: Step 1 Choose Start > Control Panel > Network Connections. Step 2 Right-click the Ethernet connection icon and choose Properties.
ZHONG 6738 User Manual Step 3 On the General tab, select the Internet Protocol (TCP/IP) component and click Properties. Step 4 The Internet Protocol (TCP/IP) Properties window appears. Step 5 Select the Obtain an IP address automatically radio button. Step 6 Select the Obtain DNS server address automatically radio button.
Page 19
ZHONG 6738 User Manual Figure 6 Login page After logging in to the DSL router as a super user, you can query, configure, and modify all the settings, and diagnose the system...
ZHONG 6738 User Manual Web-Based Management This chapter describes how to use Web-based management of the DSL router, which allows you to configure and control all of DSL router features and system parameters in a user-friendly GUI. 5.1 Device Information Choose Device Info, and the submenu of Device Info is shown as below: 5.1.1...
ZHONG 6738 User Manual This page displays the device information such as the product ID, software version, and the information of your WAN connection such as the upstream rate and the LAN address. 5.1.2 Choose Device Info > WAN and the following page appears.
ZHONG 6738 User Manual 5.1.3 Statistics 5.1.4 Choose Device Info > Statistics > LAN and the following page appears. In this page, you can view the statistical information about the recevied and transmitted data packets of the Ethernet and wireless interfaces.
ZHONG 6738 User Manual In this page, you can view the statistical information about the recevied and transmitted data packets of the WAN interface. Click Reset Statistics to restore the values to zero and recount them. 5.1.6 Choose Device Info > Statistics > xTM and the following page appears.
Page 25
ZHONG 6738 User Manual Figure 8 xDSL-2 In this page, you can view the statistical information about the recevied and transmitted data packets of the xDSL interfaces. Click xDSL BER Test to test the xDSL Bit Error Rate. Click Reset Statistics to restore the values to zero and recount them.
Page 26
ZHONG 6738 User Manual The Tested Time (sec) can be 1, 5, 10, 20, 60, 120, 180, 240, 300, or 360. Select a time in the drop-down list and click Start. The following pages appear.
Page 27
ZHONG 6738 User Manual When the ADSL BER test completes, click Stop, the following page appears.
ZHONG 6738 User Manual Note: If the BER reaches e-5, you cannot access the Internet. 5.1.8 Route Choose Device Info > Route and the following page appears.
ZHONG 6738 User Manual In this page, you can view the route table information. 5.1.9 Choose Device Info > ARP and the following page appears. In this page, you can view the MAC address and IP address information of the device connected to the router.
ZHONG 6738 User Manual In this page, you can view the host name, the IP address assigned by the DHCP server, the MAC address this is corresponding to the IP address, and the DHCP lease time. 5.1.11 IGMP Choose Device Info > IGMP and the following page appears.
ZHONG 6738 User Manual VPI (Virtual Path Identifier): The virtual path between two points in an ATM network, and its valid value is from 0 to 255. VCI (Virtual Channel Identifier): The virtual channel between two points in an ATM network, ranging from 32 to 65535 (1 to 31 are reserved for known protocols).
ZHONG 6738 User Manual 5.3.1 Layer2 Interface ATM Interface Choose Advanced Setup > Layer2 Interface > ATM Interface . In this page, you can add or remove to configure DSL ATM Interfaces. Click Add to add ATM Interface and the following page appears.
Page 35
ZHONG 6738 User Manual In this page, you can enter this PVC (VPI and VCI) value, and select DSL link type (EoA is for PPPoE, IPoE, and Bridge.), encapsulation mode, service category. VPI (Virtual Path Identifier): The virtual path between two points in an ATM network, and its valid value is from 0 to 255.
Page 36
ZHONG 6738 User Manual Service Category: you may select UBR Without PCR, UBR With PCR, CBR, Non Realtime VBR or Realtime VBR from the drop-down lsit. Select Scheduler for Queues of Equal Precedence as the Default Queue: Weighted Round Robin or Weighted Fair Queuing.
Page 37
ZHONG 6738 User Manual In this page, you can select scheduler for queues of equal precedence and enter the queue value. Click Apply/Save to save configuration. ETH Interface Choose Advanced Setup > Layer2 Interface > ETH Interface, and the following page appears.
ZHONG 6738 User Manual Click Add and the following page appears. In this page, you can select a ETH port. Click Apply/Save to save configuration. Note: If ETH Interface is selected, there are two WAN service types (PPPoE and IPoE).
Page 39
ZHONG 6738 User Manual Adding a PPPoE WAN Service This section describes the steps for adding the PPPoE WAN service. Step1 In the Wide Area Network (WAN) Service Setup page, click the Add button to display the following page. (At first, you must add a proper ATM or PTM interface for this WAN service.)
Page 40
ZHONG 6738 User Manual Step3 In this page, select the WAN service type to be PPP over Ethernet (PPPoE). Click Next to display the following page.
Page 42
ZHONG 6738 User Manual Step4 In this page, you can modify the PPP username, PPP password, PPPoE service name and authentication method. PPP Username: The correct user name provided by your ISP. PPP Password: The correct password provided by your ISP.
Page 43
ZHONG 6738 User Manual Enable PPP Debug Mode:Enable or disable this function. Bridge PPPoE Frames Between WAN and Local Ports:Enable or disable this function. Enable IGMP Multicast Proxy:If you want PPPoE mode to support IPTV, enable it. Step5 After setting the parameters, click Next to display the following page.
Page 44
ZHONG 6738 User Manual Step7 In this page, you can obtain the DNS server addresses from the selected WAN interface. Click Next, and the following page appears.
Page 45
ZHONG 6738 User Manual Step8 In this page, it displays the information about the PPPoE settngs. Click Apply/Save to save and apply the settings. Adding a MER (IPoE) WAN service This section describes the steps for adding the MER WAN service.
Page 46
ZHONG 6738 User Manual Step3 In this page, select the WAN service type to be IP over Ethernet, enter the service description for this service. After finishing setting, click Next to display the following page.
Page 47
ZHONG 6738 User Manual Step4 In this page, you may modify the WAN IP settings. You may select obtain an IP address automatically or manually enter the IP address provided by your ISP. Click Next and the following page appears.
Page 48
ZHONG 6738 User Manual Step5 In this page, you can set the network address translation settings,for example, enabling NAT, enabling firewall, and enabling IGMP multicast. After finishing setting, click Next and the following page appears.
Page 49
ZHONG 6738 User Manual Step6 In this page, select a preferred WAN interface as the system default gateway and then click Next to display the following page.
Page 50
ZHONG 6738 User Manual Step7 In this page, you can obtain the DNS server addresses from the selected WAN interface. After finishing setting, click Next to display the following page.
Page 51
ZHONG 6738 User Manual Adding a PPPoA WAN service This section describes the steps for adding the PPPoA WAN service. Step1 Choose Advanced Setup > Layer2 Interface > ATM Interface to dsipaly the DSL ATM Interface Configuration page. In this page, you need to add a PVC for PPPoA mode.
Page 52
ZHONG 6738 User Manual Step2 Select the DSL link type to be PPPoA, and select the encapsulation mode to be VC/MUX (according to the uplink equipment). After setting, click the Apply/Save button to apply the setings. Step3 Choose WAN Service and click Add to display the following page.
Page 53
ZHONG 6738 User Manual Step4 Select the proper interface for the WAN service, and then click Next to display the following page.
Page 54
ZHONG 6738 User Manual Step5 In this page, you may modify the service description. Click Next to display the following page.
Page 55
ZHONG 6738 User Manual Step6 In this page, you can enter the PPP username and PPP password provided by your ISP. Select the authentication method according to your requirement. After finishing setting, click Next to display the following page.
Page 56
ZHONG 6738 User Manual For the description of the field, please refer to the Step4 in Adding a PPPoE WAN Service of WAN Service. Step7 In this page, select a preferred WAN interface as the system default gateway and then click Next to display the following page.
Page 57
ZHONG 6738 User Manual Step8 In this page, you can obtain the DNS server addresses from the selected WAN interface. After finishing setting, click Next to display the following page.
Page 58
ZHONG 6738 User Manual Step9 In this page, it displays the information about the PPPoA settngs.Click Apply/Save to apply the settings. You can modify the settings by clicking the Back button if necessary. Adding a Bridge WAN This section describes the steps for adding the Bridge WAN service.
Page 59
ZHONG 6738 User Manual Step2 Select the proper ATM Interface and then click Next to display the following page.
Page 60
ZHONG 6738 User Manual Step3 In this page, you can select the WAN service type, and modify the service description for this service. After finishing setting, click Next to display the following page.
ZHONG 6738 User Manual Step4 In this page, it displays the information about the bridge settngs. Click Apply/Save to save and apply the settings. You can modify the settings by clicking the Back button if necessary. 5.3.3 3G WAN Service...
Page 62
ZHONG 6738 User Manual This page is used to configure 3G connection. If you want to access the Internet through 3G connection, a 3G network card is required. Connect the 3G network card to the USB interface of the Router.
Page 63
ZHONG 6738 User Manual In this page, you are allowed to configure the settings of the 3G USB modem. Enable USB Modem: If you want to access the Internet through the 3G network card, you must enable the USB modem.
ZHONG 6738 User Manual APN: APN (Access Point Name) is used to identify the service type. Enter the APN provided by your 3G ISP. Dial Number: Enter the dial number provided by your 3G ISP. Idle time (in sec.): If no traffic for the preset time, the 3G will disconnect automatically.
ZHONG 6738 User Manual In this page, you can set speed of all the LAN and WAN interface. After setting, click Apply/Save to take the settings into effect. 5.3.5 LAN Configuration 5.3.5.1 IPv4 Configuration Choose Advanced Setup > LAN Configuration > IPv4 Configuration, and the...
Page 66
ZHONG 6738 User Manual In this page, you can configure an IP address for the DSL router, enable IGMP snooping, enable or disable the DHCP server, edit the DHCP option, configure the DHCP advanced setup and set the binding between a MAC address and an IP...
Page 67
ZHONG 6738 User Manual IP Address: You can modify the IP address of the LAN interface. The preset IP address is 192.168.1.1. Subnet Mask: Enter the subnet mask of this IP address. The preset subnet mask is 255.255.255.0. Enable IGMP Snooping: IGMP snooping enables the router to forward multicast traffic intelligently, instead of flooding all ports in the VLAN.
Page 68
ZHONG 6738 User Manual In this page, you can add, edit or delete the DHCP60 options. Editing the DHCP Option Click the Edit DHCP Option button in the IPv4 Configuration page, the following page appears. In this page, you can add, edit or delete the DHCP options, and these options will be sent to the DHCP client.
Page 69
ZHONG 6738 User Manual Add Entries Click the Add Entries button in the IPv4 Configuration page, the following page appears.
Page 70
ZHONG 6738 User Manual In this page, enter the MAC address of the LAN host and the static IP address that is reserved for the host, and then click the Apply/Save button to apply the settings. Configuring the Second IP Address and Subnet Mask for a LAN...
Page 71
ZHONG 6738 User Manual In this page, you can set an IP address for the DSL IPv6 router, enable the DHCPv6 server, enable RADVD and enable the MLD snooping function. Enable Unique Local Addresses and Prefix Advertisement: Unique Local Addresses is used to control CPE in the LAN. Enable this function is to broadcast proxy prefix to the LAN.
Page 72
ZHONG 6738 User Manual Enable DHCPv6 Server and RADVD: WIDE-DHCPv6 is an open-source implementation of dynamic host configuration protocol for IPv6 (DHCPv6) originally developed by the KAME project. The implementation mainly complies with the following standards: RFC3315, RFC3319, RFC3633, RFC3646, RFC4075, RFC 4272 etc. The router advertisement daemon (RADVD) is running Linux or BSD systems acting as IPv6 routers.
ZHONG 6738 User Manual In this page, you can set a VLAN for the specified LAN port, then bundle this LAN port with a certain WAN interface. The packet with configured VLAN value will be transmitted from the bundled WAN interface.
Page 74
ZHONG 6738 User Manual Use interface: Select an interface that you want to configure. Select a Service: Select a proper service in the drop-down list.
Page 75
ZHONG 6738 User Manual Custom Server: Enter a new service name to establish a user service type. Server IP Address or Hostname: Assign an IP address to virtual server. Status: You can choose Enable or Disable from the drop-down list.
Page 76
ZHONG 6738 User Manual In this page, you may add or remove an entry of port triggering. Click the Add button to display the following page. Use interface: Select an interface that you want to configure. Select an application: Select a proper application in the drop-down list.
Page 77
ZHONG 6738 User Manual Trigger port End: The end port number that LAN uses to trigger the open port. Trigger Protocol: Select the application protocol. You may select TCP/UDP, TCP, or UDP. Open Port Start: The start port number that is opened to WAN.
Page 78
ZHONG 6738 User Manual In this page, enter the IP address of the DMZ host. After finishing the settings, click the Apply/Save button to apply the settings. If you want to clear the DMZ function of the host, please delete the IP address of the host in the field of DMZ Host IP Address, and then click the Apply/Save button.
ZHONG 6738 User Manual 5.3.7 Security Firewall Choose Security > Firewall and the following page appears. Click Modify Firewall or Remove Firewall to modify or remove the firewall. And click Modify Rule or Remove Rule to modify or remove the rule.
Page 80
ZHONG 6738 User Manual enabled: Select the check box to enable the firewall rule. Protocol: You can select UDP, TCP, or ICMP from the drop-down list. Action: You can select Permit, Drop, or Reject from the drop-down list. RejectType: You can select the reject type, when you select Reject as the action.
Page 81
ZHONG 6738 User Manual MAC Filtering In some cases, you may want to manage Layer2 MAC address to block or permit a computer within the home network. When you enable MAC filter rules, the DSL router serves as a firewall that works at layer 2.
ZHONG 6738 User Manual Protocol Type: Select the proper protocol type. Destination MAC Address: Enter the destination MAC address. Source MAC Address: Enter the source MAC address. Frame Direction: The direction of transmission frame. WAN Interface (Configured in bridge mode only): Select the proper WAN interface in the drop-down list.
Page 83
ZHONG 6738 User Manual Click the Add button to display the following page. This page is used to control the time restriction to a special LAN device that connects to the DSL router. In this page, se the user name and configure the time settings.
Page 84
ZHONG 6738 User Manual Url Filter Click Advanced Setup > Parental Control > Url Filter, and the following page appears. Thisp age is used to prevent the LAN users from accessing some Websites in the WAN. In this page, you may select the Exclude URL list type or the Include URL list type.
ZHONG 6738 User Manual In this page, enter the URL address and its corresponding port number. For example, enter the URL address http://www.google.com and the port number 80, and then click the Apply/Save button. See the following figure: 5.3.9 Quality of Service Choose Advance Setup >...
Page 86
ZHONG 6738 User Manual In this page, you can configure the default DSCP mark. After setting, click Apply/Save to save and apply the settings. Note: If the Enable QoS checkbox is not selected, all QoS will be disabled for all interfaces.
Page 87
ZHONG 6738 User Manual In this page, you can enable, add or remove a QoS rule. Note:...
Page 88
ZHONG 6738 User Manual The lower integer value for precedence indicates the higher priority. Click the Add button to display the following page. Name: Enter the name of QoS queue. Enable: Enable or disable the QoS queue. Interface: Select the proper interface for the QoS queue.
Page 89
ZHONG 6738 User Manual In this page, you can create a traffic class rule and mark the DSCP or Ethernet priority of the packet.
ZHONG 6738 User Manual 5.3.10 Routing Default Gateway Choose Advanced Setup > Routing > Default Gateway, and the following page appears. In this page, you can modify the default gateway settings. Select a proper WAN interface in the drop-down list of Selected WAN Interface as the system default gateway.
Page 91
ZHONG 6738 User Manual Static Route Choose Advanced Setup > Routing > Static Route and the following page appears. In this page, you can add or remove a static routing rule. Click the Add button to display the following page.
Page 92
ZHONG 6738 User Manual Policy Routing Choose Advanced Setup > Routing > Policy Routing and the following page appears. In this page, you can add or remove a static policy rule. Click the Add button to display the following page.
ZHONG 6738 User Manual In this page, if you want to configure an individual interface, select the desired RIP version and operation, and then select the Enabled checkbox for the interface. After setting, click Apply/Save to save and apply the settings.
ZHONG 6738 User Manual In this page, you can select a DNS server interface from the available interfaces, manually enter the DNS server addresses, or obtain the DNS address from a WAN interface. After finishing setting, click Apply/Save to save and apply the settings.
Page 95
ZHONG 6738 User Manual In this page, you are allowed to modify the DDNS settings. Click the Add button to display the following page. D-DNS provider: Select a proper DDNS server in the drop-down list. Hostname: It is the domain name and it can be modified.
ZHONG 6738 User Manual After finishing setting, click Apply/Save to save and apply the settings. 5.3.13 Choose Advanced Setup > DSL and the following page appears. In this page, you can view the DSL settings. Usually, you can keep this factory default setting. The modem negotiates the modulation mode with the DSLAM.
Page 97
ZHONG 6738 User Manual In this page, you can set the DSL settings. Usually, you do not need to modify the factory default settings. After finishing setting, click Apply/Save to save and apply the settings.
ZHONG 6738 User Manual 5.3.14 UPnP Choose Advanced Setup > UPnP and the following page appears. In this page, you can enable or disable the UPnP function. After finishing the settings, click Apply/Save to save and apply the settings. 5.3.15 DNS Proxy Basic Configuration Choose Advanced Setup >...
Page 99
ZHONG 6738 User Manual After enabling the DNS proxy function, enter the host name of the broadband router and the domain name of the LAN network, and then click Apply/Save to save and apply the settings. Server Configuration Choose Advanced Setup > DNS Proxy > Server Configuration and the following page appears.
ZHONG 6738 User Manual 5.3.16 Print Server Choose Advanced Setup > Printer Server and the following page appears. In this page, you can enable or disable the printer server. After finishing the settings, click Apply/Save to save and apply the settings.
ZHONG 6738 User Manual 5.3.18 Packet Acceleration Choose Advanced Setup > Packet Acceleration and the following page appears. In this page, you can enable packet flow accelerator. 5.3.19 Storage Service Storage Device Info Choose Advanced Setup > Storage Service > Storage Device Info and the...
Page 102
ZHONG 6738 User Manual This page is used to display the information of the storage device that connects to the DSL router. User Accounts Choose Advanced Setup > Storage Service > User Accounts and the following page appears. In this page, you can add or remove a storage user account.
ZHONG 6738 User Manual In this page, you can set the user name and password of the storage account and a volume name. 5.3.20 Interface Grouping Choose Advanced Setup > Interface Grouping and the following page appears.
Page 104
ZHONG 6738 User Manual Interface grouping supports multiple ports to PVC and bridging groups. Each group will perform as an independent network. To support this feature, you must create mapping groups with the appropriate LAN and WAN interfaces using the Add...
Page 105
ZHONG 6738 User Manual button. The Remove button will remove the grouping and add the ungrouped interfaces to the default group. Only the default group has IP interface. Click the Add button to display the following page.
ZHONG 6738 User Manual In this page, please follow the on-screen configuration steps to configure the parameters of the interface grouping. After setting, click Apply/Save to save and apply the settings. 5.3.21 IP Tunnel IPv6 in IPv4 Choose Advanced Setup > IP Tunnel > IPv6inIPv4 and the following page appears.
Page 108
ZHONG 6738 User Manual IPv4 Mask Length: The value is 0 ~ 32. 6rd Prefix with Prefix Length: prefix/length, such as: 2002::/64. Enter the field with proper parameters as follow for example: After proper settings, click Apply/Save and the following page appears.
ZHONG 6738 User Manual Click Add and the following page appears. In this page, you can add a new tunnel of IPv4 in IPv6. 5.3.22 IPSec Choose Advanced Setup > IPSec and the following page appears. In this page, you can add or remove the IPSec tunnel connections.
Page 110
ZHONG 6738 User Manual In this page, you can set the parameters such as the IPSec connection name, tunnel mode, and remote IPSec gateway address.
ZHONG 6738 User Manual If you need to configure the advanced settings of this IPSec tunnel connection, please click the Show Advanced Settings button to display the other parameters. After finishing the settings, click Apply/Save to save and apply the settings.
Page 112
ZHONG 6738 User Manual In this page, please set the following parameters. Certificate name: Set the certificate name. Common Name: The common name is the "fully qualified domain name," (or FQDN) used for DNS lookups of your server (for example, www.mydomain.com).
Page 113
ZHONG 6738 User Manual The certificate request needs to be submitted to a certificate authority, which will sign the request. Then the signed certificate needs to be loaded to the DSL router. Click Load Signed Certificate in this page, and the following page appears.
Page 114
ZHONG 6738 User Manual In this page, paste the signed certificate, and then click the Apply button. A new certificate is created. Importing an Existing Local Certificate To import an existing certificate, click the Import Certificate button to display the...
Page 115
ZHONG 6738 User Manual In this page, paste the certificate and the private key. Finally, click the Apply button to import the certificate. Trusted CA Choose Advanced Setup > Certificate > Trusted CA and the following page appears.
Page 116
ZHONG 6738 User Manual In this page, you may import or remove a CA certificate. Click the Import Certificate button to display the following page. In this page, enter the certificate name and paste the certificate content. Finally, click the Apply button to import the certificate.
ZHONG 6738 User Manual 5.3.24 Power Management Choose Advanced Setup > Power Management and the following page appears. This page allows control of Hardware modules to evaluate power consumption. Use the control buttons to select the desired option. After proper configurations, click Apply to take the configurations effect.
ZHONG 6738 User Manual In this page, you can configure the multicast parameters. After finishing the settings, click Apply/Save to save and apply the settings. 5.4 Wireless Choose Wireless and the submenus of Wireless are shown as below:...
ZHONG 6738 User Manual 5.4.1 Basic Settings Choose Wireless > Basic to display the following page. In this page, the figure on the right area is 2-dimensional code. It includes the wireless SSID and password. You can obtain the wireless SSID and password through scanning this figure.
Page 120
ZHONG 6738 User Manual This page allows you to configure the basic features of the wireless LAN interface. Enable Wireless: Enable or disable the wireless function. Hide Access Point: if you want to hide any access point for your router, select this option, and then a station cannot obtain the SSID through the passive scanning.
ZHONG 6738 User Manual Clients Isolation: When many clients connect to the same access point, they can access each other. If you want to disable the access between the clients that connect to the same access point, you can select this option.
Page 123
ZHONG 6738 User Manual There are 2 primary methods used in the Wi-Fi Protected Setup: Push button: An actual push button on the hardware or through a simulated push button in the software. (This is an optional method on wireless client).
Page 124
ZHONG 6738 User Manual WEP Encryption: Enable or disable WEP encryption. After enabling this function, you can set the encryption strength, current network key, and network keys. Encryption Strength: You can set 64-bit or 128-bit key. Current Network Key: The current key that you use.
Page 125
ZHONG 6738 User Manual RADIUS Server IP Address: Enter the IP address of the RADIUS server. RADIUS server is used to authenticate the hosts on the wireless network. RADIUS Port: The port number that the RADIUS server uses. The default port number is 1812.
Page 126
ZHONG 6738 User Manual WPA Group Rekey Interval: Setting the interval for renewing key. RADIUS Server IP Address: Enter the IP address of the RADIUS server. RADIUS server is used to authenticate the hosts on the wireless network. RADIUS Port: The port number that the RADIUS server uses. The default port number is 1812.
Page 127
ZHONG 6738 User Manual WPA/WAPI passphrase: The key for WPA encryption. Click the Click here to display button to display the current key. The default key is 87654321. WPA Group Rekey Interval: Setting the interval for renewing key. WPA/WAPI Encryption: You may select AES or TKIP+AES.
Page 128
ZHONG 6738 User Manual WPA2 Preauthentication: Enable or disable pre-authentication. Network Re-auth Interval: Set the network re-auth interval. WPA Group Rekey Interval: Setting the interval for renewing key. RADIUS Server IP Address: Enter the IP address of the RADIUS server.
Page 129
ZHONG 6738 User Manual RADIUS Key: Set the RADIUS key for accessing the RADIUS server. WPA/WAPI Encryption: You may select AES, or TKIP+AES. - WPA2-PSK The parameters’ description of WPA2-PSK mode, please refer to the WPA-PSK mode. - Mixed WPA2/WPA...
Page 130
ZHONG 6738 User Manual The parameters’ description of Mixed WPA2/WPA mode, please refer to the WPA2 mode. - Mixed WPA2/WPA-PSK...
ZHONG 6738 User Manual The parameters’ description of Mixed WPA2/WPA-PSK mode, please refer to the WPA-PSK mode. 5.4.3 MAC Filter Choose Wireless > MAC Filter to display the following page.
ZHONG 6738 User Manual This page is used to allow or reject the wireless clients to access the wireless network of the wireless router. In this page, you can add or remove the MAC filters. There are three MAC restrict modes: Disabled, Allow and Deny.
ZHONG 6738 User Manual This page allows you to configure the wireless bridge of the wireless LAN interface. AP Mode: you may select Access Point or Wireless Bridge. Bridge Restrict: Enable or disable the bridge restrict function. Remote Bridges MAC Address: Enter the remote bridge MAC address.
ZHONG 6738 User Manual This page allows you to configure the advanced features of the wireless LAN interface. Usually, you do not need to change the settings in this page. Note: The advanced wireless setting is only for the advanced user. For the common user, do not change any settings in this page.
ZHONG 6738 User Manual 5.5.2 Fault Management Note: The Fault Management is only available for VDSL PTM Click Diagnostics > Fault Management, and the following page appears.
ZHONG 6738 User Manual 5.6.1 Settings Backup Choose Management > Settings > Backup to display the following page. In this page, click the Backup Settings button to save your router’s settings to your local PC.
ZHONG 6738 User Manual Update Choose Management > Settings > Update, and the following page appears. In this page, click the Browse… button to select the correct new settings file, and then click the Update Settings button to update the router’s settings.
Page 140
ZHONG 6738 User Manual In this page, you are allowed to configure the system log and view the security log. Configuring the System Log Click the Configure System Log button to display the following page. In this page, you can set 3 types of system log modes, including Local, Remote, and Both.
ZHONG 6738 User Manual After finishing setting, click the Apply/Save button to save and apply the settings. Note: If you want to log all the events, you need to select the Debugging log level. View System Log Click the View System Log button to display the following page.
ZHONG 6738 User Manual Simple Network Management Protocol (SNMP) allows a management application to retrieve statistics and status from the SNMP agent in this device. In this page, you may enable or disable the SNMP agent and set the parameters such as the read community, system name and trap manager IP.
Page 143
ZHONG 6738 User Manual WAN Management Protocol (TR-069) allows an Auto-Configuration Server (ACS) to perform auto-configuration, provision, collection, and diagnostics to this device.
ZHONG 6738 User Manual In this page, you may configure the parameters such as the ACS URL, ACS password, and connection request user name. After finishing setting, click the Apply/Save button to save and apply the settings. 5.6.5 Internet Time Choose Management >...
ZHONG 6738 User Manual In this page, set the proper time servers, and then click the Apply/Save button to save and apply the settings. 5.6.6 Access Control Passwords Choose Management > Access Control > Passwords, and the following page appears.
Page 146
ZHONG 6738 User Manual In the page, you can modify the username and password of different users. After finishing the settings, click the Apply/Save button to save and apply the settings. Note: Password cannot contain a space. Services Control Choose Management > Access Control > Services Control and the following page...
Page 147
ZHONG 6738 User Manual In this page, you can enable or disable the different types of services. After setting, click the Apply/Save button to save and apply the settings. IP Addresses Choose Management > Access Control > IP Addresses, and the following page...
ZHONG 6738 User Manual In the page, you can enable or disable the IP Address Access Control mode, if enabled, permits access to local management services from IP addresses contained in the Access Control List. If the Access Control mode is disabled, the system will not validate IP addresses for incoming packets.
ZHONG 6738 User Manual If you want to upload the software, click the Browse… button to choose the new software, and then click the Update Software button. Note: When software update is in progress, do not shut down the router. After software update completes, the router automatically reboots.
ZHONG 6738 User Manual 5.6.9 Tools Choose Management > Tools and the following page appears. In this page, enter the IP address. The Ping package sent by the moderm would be transmitted to the IP address you entered here.you can view the Ping result by click Ping.
Page 151
ZHONG 6738 User Manual Q&A Q: Why all the indicators are off? A: Check the following: The connection between the power adaptor and the power socket. The status of the power switch. (2) Q: Why the LAN indicator is off?