Memorex MMP3731 User Manual page 9

Page 9 of 19
MMP3731 (DFP5502) Manual.doc
Using Special Functions
Equalizer Mode (EQ)
The current equalizer mode is displayed in the lower left hand corner of the LCD screen in a
rectangular block with a black background.
Changing the EQ mode
- Press and hold the (l/EQ/
background. Keep pressing the (l/EQ/
equalizer modes:
- Stop pressing the (l/EQ/
clear background. The background will turn back to the black after a few seconds.
Repeat Button
O
Press the (l /EQ/
mode is selected, the following icons will displayed in the upper right hand corner of the
LCD screen:
" " Randomly play all the files in the player once.
" " Randomly play all the files in the player continuously.
" " Plays a single file repeatedly.
" " Play all the files repeatedly in consecutive order.
" " Edits and plays one section repeatedly. Press
and press
" " Plays the play list once. (The play list must be created before using this function.)
" " Plays the play list repeatedly. (The play list must be created before using this
function)
NAVIGATION
You may search for, listen to, and program the play list in the Navigation mode. Press the
button and use the : or the 9 button to highlight the Navigation
MODE
(picture of Porgram)
O
) button until the current mode is displayed with a clear
O
) button when your desired selection is displayed with a
) button repeatedly to select different repeat mode options. As each
button again to end with point B
O
) button repeatedly to select one of the six
button once to start \with point A
.
icon as shown.