Balancing Speaker Relative Volume; Surround Modes - Accurian 6.1ch Sirius-Ready A/V Surround Receiver User Manual

Balancing Speaker Relative Volume

The test tone function is useful to adjust the relative volume between
speakers. Once the balance is set, you don't have to change the balance as
long as the speakers aren't moved.
1. Press TEST TONE on the remote control. The test tone is emitted
from each speaker in the following order at 3-second intervals.
FL(Front Left)
S-W
(Sub Woofer)
If certain speakers are not being used, (for example, no center
speaker) the noise sequencer will automatically skip over that
channel.
2. Adjust the volume to the normal listening level.
3. Adjust the volume of each speaker so that the test tone from
each speaker sounds the same. The level of the speaker which is
emitting the test tone can be changed by pressing
The level can be adjusted in 1 dB steps from -10 dB to +10 dB.
4. When the setting has been fi nished, press TEST TONE to stop the
test tone.

Surround Modes

Analog signals use the AUDIO L/R jacks, and digital signals use the
DIGITAL OPTICAL IN or COAXIAL IN jacks. You must use a digital
connection to receive a digital source. If you use an analog connection, the
signal is analog, even if you play a digital DVD disc.
This receiver supports several surround systems, including:
6.1 channel = Front L/R, Center, Surround L/R, Surround Back , Subwoofer
5.1 channel = Front L/R, Center, Surround L/R, Subwoofer
CEN(Center)
SL SB
(Surround Left) (Surround Back)
48
FR(Front Right)
SR
(Surround Right)
or .