Technical Data; Problem With Mains Supply - Electrolux EWT 2852EWW User Manual

20 www.electrolux.com
If the appliance shows other alarm codes
(the indicator of button
red). Deactivate and activate the

14. TECHNICAL DATA

Dimension
Electrical connection
Level of protection against ingress of solid parti‐
cles and moisture ensured by the protective cov‐
er, except where the low voltage equipment has
no protection against moisture
Water supply pressure Minimum
Water supply
Maximum Load
Energy Efficiency Class
Spin Speed
1) Connect the water inlet hose to a water tap with a 3/4'' thread.

15. PROBLEM WITH MAINS SUPPLY

A momentary or a long interruption of
power supply stops the washing machine
operating, especially when the load on
electrical network exceeds the maximum
nominal load, 2000 watts. This can
decrease the voltage supply below the
acceptable values, 185 volts.
When these interruptions occurs, most of
the time, it is only necessary to wait until
the normal voltage supply is restored.
16. ENVIRONMENTAL CONCERNS
Recycle the materials with the symbol
. Put the packaging in applicable
containers to recycle it. Help protect the
environment and human health and to
recycle waste of electrical and electronic
appliances. Do not dispose appliances
flashes in
Width/ Height/ Depth/
Total depth
Voltage
Overall power
Fuse
Frequency
Maximum
1)
Cotton
Maximum
appliance. If the problem continues,
contact the Authorised Service Centre.
400 mm/ 890 mm/ 600 mm/ 600
mm
230 V
2200 W
10 A
50 Hz
IPX4
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Cold water
5,5 kg
A+
800 rpm
To avoid these interruptions,
we suggest:
• To let the washing
machine operating during
times when electrical
network is not overload
(e.g. during night).
• To ensure that other
appliances aren't already
operating.
marked with the symbol
household waste. Return the product to
your local recycling facility or contact
your municipal office.
with the