Starting Your Device For The First Time - Sony XPERIA Z2 SGP561 User Manual

1 Remove the cover of the nano SIM card slot.
2 Pull out the nano SIM card holder.
3 Remove the nano SIM card.
4 Insert the nano SIM card holder back into its slot.
5 Re-attach the nano SIM card slot cover.
To insert a memory card
1 Insert a fingernail into the gap between the memory card slot cover and the top
side of the device, then detach the cover.
2 Place the memory card in the memory card slot, with the gold-coloured
contacts facing down, then push the memory card all the way into the slot until
you hear a locking sound.
3 Reattach the memory card cover.
To remove the memory card
1 Turn off the device.
2 Remove the cover of the memory card slot, then press against the edge of the
memory card and release it.
3 Draw the card outwards to remove it fully.
Starting your device for the first time
The first time you start your device, a setup guide opens to help you configure basic
settings, sign in to some accounts, and personalise your device. For example, if you
have a Sony Entertainment Network account, you can sign in to it here and get set up
straight away. And you can download Internet and Wi-Fi® settings.
You can also access the setup guide later from the Settings menu. To access the setup guide
on a device with multiple users, you must be logged in as the owner, that is, the primary user.
To turn on the device
Make sure that the battery is charged for at least 30 minutes before you turn on the device for
the first time.
This is an Internet version of this publication. © Print only for private use.
9