Setting Channel Presets; Recalling Channel Presets; Jump Preset Button - Sirius Satellite Radio SportsterIR SPR2C User Manual

Setting Channel Presets

You can store up to 30 of your favorite channels as
presets, for quick access. Presets are stored in 3
banks, A, B & C, each containing 10 channel presets.
1. Press the BAND button to activate the preset bank you
want. The selected bank is shown in the lower right
corner of the Default screen.
2. Select the channel you want to preset.
3. Hold the numbered preset button you want to store
the channel in for at least 2 seconds.
• The selected preset number will flash and then
remain lit on the display to show that it has been
memorized.
• If the preset button already has a channel stored in it,
the preset will be replaced by the new channel.

Recalling Channel Presets

The 10 presets in the active bank (A, B or C) can be
selected by pressing the "0" – "9" buttons.
1. Press the BAND button to activate the preset bank you
want. The selected bank is shown in the lower right
corner of the Default screen.
2. Press the desired preset button "0" – "9" to recall
Sportster Replay SPR2C Radio Receiver User Guide
the preset. The channel will change and the
display will revert to the Default screen for the new
channel.

Jump Preset Button

The Sirius Sportster Replay Receiver includes a
special preset button labeled Jump. It can be
used for channels that are accessed frequently
and temporarily such as your favorite music,
news or sports. This button allows you to quickly
tune to one specific channel and then tune back
to the original channel.
Refer to the Jump Settings options section for
information on configuring your Jump preset button.
13