Improving Energy Efficiency; Handling The Unexpected; Smart Entry Remote Battery Strength; Overheating - Honda Clarity ELECTRIC 2018 Owner's Manual

DRIVING
When Charging is Complete
n
Press the release button on the
charge connector to release it from
the inlet. If you removed the inlet
cover, make sure to put the cover
back on the inlet before you close
the lid. The charge indicator goes off
once charging is complete.
Note: The charging equipment provided with this vehicle has been tested and
found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Improving Energy Efficiency

Achieving energy efficiency is dependent on several factors, including driving
conditions, load weight, standby time, driving habits, and vehicle condition.
Depending on these and other factors, you may not achieve the rated driving
range of this vehicle.
116 |

HANDLING THE UNEXPECTED

Learn about what to do in critical or emergency situations.
Release button

Smart Entry Remote Battery Strength

If the battery life in your remote transmitter is weak, a beep sounds and the
POWER button indicator flashes. A message appears in the driver information
interface, with information on how to start the power system.
1. Touch the back of the remote
2. With the brake pedal or clutch pedal

Overheating

If the power system overheats, you will see the message, "High Temperature.
Power Reduced" appear on the driver information interface.
Immediately park the vehicle in a safe place. Put the vehicle in Park (P) and
set the parking brake. Turn off all accessories and turn on the hazard warning
lights. Keep the power mode on and resume driving if the message disappears.
If the message does not disappear or reappears, contact an authorized Honda
Clarity Electric dealer for repairs.
NOTICE
Keep the hood closed while waiting for the power system to cool down.
Opening the hood will cause the radiator fan to stop, making it take longer for
the power system to cool down.
transmitter to the POWER button
while the indicator is flashing.
pressed, press the POWER button
within 10 seconds.
HANDLING THE UNEXPECTED
| 117