Sirius Satellite Radio SIRIUS S50 Details page 11

Vent Mount Method (C)
When assembling the vent clip, note that the lower arm may be attached in two different posi-
tions. You should assemble the vent clip in the configuration that works best in your particular
vehicle. Figure 7 illustrates both possible configurations of the vent clip.
To mount the car dock using the vent mount method, assemble the mount as follows, as
shown in Figure 8:
1. Attach the vent clip to mounting bracket 1 using the hex screws and nuts provided.
2. Attach mounting bracket 2 to mounting bracket 1, placing a collar into bracket 1 before
screwing bracket 2 to bracket 1. The side of the collar with the hole should face mount-
ing bracket 2.
3. Attach the car dock to mounting bracket 2 using the provided screws.
4. Slide the vent clip portion of the mount into a vent in your vehicle, insuring that one of
the vent louvers slides between the upper and lower portions of the two clip arms, and
hooks the rear of the louver.
1 [ ]
Getting Started
Figure 7 Figure 7
Vent Clip Mounting Mounting
Bracket (1) Bracket (2)
Collar
Clip Arms
Figure 8 Figure 8
Vehicle
Dock
[ ] 1
Getting Started