Battery Replacement - Hanna Instruments HI99300 Instruction Manual

BATTERY REPLACEMENT

When the remaining battery life is less
than 10% the battery tag blinks on the
display to warn the user.
Battery Error Prevention System (BEPS)
If the battery is too weak ("0%") the display shows
"bAtt", "DEAD" for few seconds then the meter power off.
Immediately replace the batteries with new ones.
The batteries are accessed by opening the battery cover
on the back of the instrument. Remove protective boot
if present.
Replace the three 1.5V AAA alkaline batteries located in
the battery compartment, observing the indicated polarity.
Replace the battery cover making sure that the gasket is
in place.
14