Table of Contents
Advertisement
Stiletto 10 battery installation and removal
To install the battery, refer to Figure 1 and slide the bottom of the battery (1) into the bottom
of Stiletto 10 (2) until the battery engages the clips. Then press the left side of the battery
down (3) until the release latch (4) locks the battery in place.
To remove the battery from the Stiletto 10, pull the release latch (4). When the battery pops
up, grasp the battery and slide it toward the latch until it disengages from the radio.
figure 1
figure 1
[
Battery Life, Installation, and Charging
]
11
Advertisement
Table of Contents
