Mio MiVue 785 Quick Start Manual

Quick Start Guide
Getting to know your dash cam
Mini-USB connector
1
AV-out connector
2
(for selected models only)
Device mount socket
3
Using your dash cam in a vehicle
Precautions and notices
Do not operate the device while driving. Using this product does not change the requirement for
l
a driver to take full responsibility for his or her behavior. This responsibility includes observing all
traffic rules and regulations in order to avoid accidents, personal injury or property damage.
A window mount is needed when using the dash cam in a car. Make sure that you place the dash
l
cam in an appropriate place, so as not to obstruct the driver's view or deployment of airbags.
Make sure that no object is blocking the camera lens and no reflective material is placed near the
l
lens. Please keep the lens clean.
If the car's windscreen is tinted with a coating, it may impact the recording quality.
l
To ensure the highest quality recordings, you are advised to place the dash cam near the rear
l
view mirror.
Select an appropriate location for mounting the device in a vehicle. Never place the device where
l
the driver's field of vision is blocked.
If the car's windscreen is tinted with a reflective coating, it may be athermic and impact the GPS
l
reception. In this instance, please mount your device where there is a "clear area."
The system will automatically calibrate the G sensor of the device during start-up. To avoid
l
G sensor malfunction, always turn the device on AFTER you mount it in the vehicle properly.
Make sure that your car is parked on level ground. Follow the instructions to securely mount your dash
cam in a vehicle.
1. Mount the dash cam.
2. Adjust the lens angle.
3. Connect the cables.
Inserting a memory card
The dash cam supports the Class 10 memory cards with 8 GB – 128 GB capacity.
Hold the card (MicroSD) by the edges and gently insert it into the slot as shown in
the illustration. To remove a card, gently push the top edge of the card inwards to
release it and pull it out of the slot.
Formatting a card
To format a memory card (all data will be erased), tap
TM
4
5
6
7
1
2 2
785
TM
Microphone
Touch screen
System indicator
Shutdown button
3
> > .
5 6 1 5 N 5 6 8 0 0 1 2
Speaker
8
Camera lens
9
Power button
10
Memory card slot
11
R 0 0