Mitsubishi Electric PEH-P8MYA Technical & Service Manual page 11

Display
A Current time/Timer
C Centralized control
D Abnormality control
E Operation mode:
FAN,
F Preparing for Heating mode
G Defrost mode
H Set temperature
I Power ON
J Louver
Caution:
• Only the Power display lights when the unit is stopped and power supplied to the unit.
• When power is turned ON for the first time the (CENTRAL CTRL) display appears to go off momentarily but this is not
a malfunction.
• When the central control remote control unit, which is sold separately, is used the ON-OFF button, operation switch
button and TEMP. adjustment button do not operate.
• "NOT AVAILABLE" is displayed when the Airflow direction button or Louver button are pressed. This indicates that
this room unit is not equipped with the fan direction adjustment function and the louver function.
• When power is turned ON for the first time, it is normal that "H0" is displayed on the room temperature indication (For
max. 2 minutes). Please wait until this "H0" indication disappear then start the operation.
D
CENTRALLY CONTROLLED
E
CHECK
F
STAND BY
DEFROST
TEMP.
G
H
COOL, DRY,
HEAT
A U T Q S
C B
1Hr.
ON OFF
ßC
CLOCK
FILTER
CHECK MODE
ßC
TEST RUN
ERROR CODE
FUNCTION
NOT AVAILABLE
ON/OFF
I
K L J
K
L
M Function setting mode
AUTO,
N
O Error check mode
P
Q Set effective for 1 hr.
R
S
T
U
–9–
R
P
O
N
M
Not available function
Ventilation
Test run mode
Filter sign
Sensor position
Room temperature
Airflow
Fan speed