Printing Maintenance; Replacing An Ink Tank - Canon PIXMA iP6700D Series Quick Start Manual

Printing Maintenance

Printing Maintenance Printing Maintenance Printing Maintenance

Replacing an Ink Tank

Replace ink tank(s) if they are out of ink. When replacing them, check the model numbers
and their installation positions.
With this printer, the ink tanks must be installed in the order (from left to right) indicated
below:
Black: CLI-8BK
Cyan: CLI-8C
PhotoCyan: CLI-8PC
For details, refer to "Replacing an Ink Tank" in the Direct Printing Guide .
Be sure to install the ink thanks in the correct order. The proper
arrangement from the left is Black, Cyan, Photo Cyan, Photo Magenta,
Magenta, Yellow.
Should missing characters or white streaks appear despite sufficient
ink levels, see "When Printing Becomes Faint or Colors are Incorrect When Printing Becomes Faint or Colors are Incorrect When Printing Becomes Faint or Colors are Incorrect" When Printing Becomes Faint or Colors are Incorrect
on page 32.
To maintain optimal print quality, use an ink tank within six months of
its first use.
Once an ink tank has been used, do not remove it from the printer and
leave it out in the open. This will cause the ink tank to dry out and the
printer may not operate properly if it is reinstalled.
Color ink consumption may occur even when black-and-white or
grayscale printing is specified.
Color ink is consumed in the head cleaning and deep cleaning, which
are necessary to maintain the printer's capabilities.
When you start printing after replacing the ink tank, the printer
executes Print Head Cleaning automatically. Do not perform any other
operations until the Print Head Cleaning finishes.
PhotoMagenta: CLI-8PM
Magenta: CLI-8M
Yellow: CLI-8Y
Printing Maintenance
31