Table of Contents
Advertisement
Hardware Setup for Windows 98 SE, Me, 2000, and XP
Follow these instructions to install your Card on your PC:
Note: Your Card is sensitive to static electricity, which can damage its delicate
electrical components. To protect your device, always touch the metal chassis of your
computer before handling the Card. This will ground any potential electrostatic
discharge. Avoid touching the metal connector when handling the Card. Dry weather
conditions or walking across carpeted
floors may cause you to acquire an
electrostatic charge.
1. Insert the Card directly in an
available PCMCIA Type II slot on your
notebook computer. Your system
should register a new device found.
2. Choose "Install from a list or specific
location"; then click "Next".
12
HARDWARE SETUP
Advertisement
Table of Contents
