16.1.3 Removing the Front Grille (Right) and Front Grille (Left)
1
Perform "16.1.1 Removing the Front Panel".
2
Open the vertical airflow direction louver slowly.
3
Remove the fixing screw (1 piece) of the indoor/outdoor unit transmission wire cover and leave the cover
open.
Note on disassembly: Note that the front grille cannot be removed if the cover is closed because of the
reinforced safety structure of electric wiring.
4
Remove the screws of the front grille (right) and (left) (2 screws each).
5
Disengage the tab on the bottom part of the front grille (right) and (left) (one tab each). Slightly lift the bottom
part and then raise the front grilles to remove them.
89