Specifications - Behringer MDX4600 Quick Start Manual

20 MDX4600/MDX2600
Specifi cations
Audio Inputs
Type XLR and ¼ " TRS connectors, servo-balanced
Impedance
+4 dBu 50 kΩ balanced, 50 kΩ unbalalanced @ 1 kHz
-10 dBV 50 kΩ balanced, 100 kΩ unbalanced @ 1 kHz
Operating Level +4 dBu / -10 dBV, switchable
Max. input level +22 dBu, balanced and unbalanced
CMRR
Audio Outputs
Type XLR and ¼ " TRS connectors, servo-balanced
Impedance 100 Ω balanced, 50 Ω unbalanced @ 1 kHz
Max. output level +21 dBu, balanced and unbalanced
Sidechain Inputs
Type ¼ " TS connector, unbalanced
Impedance
Max. input level
Sidechain Outputs
Type ¼ " TS connector, unbalanced
Impedance
Max. output level
System Specifi cations
Frequency range 10 Hz to 70 kHz, +0/-3 dB
S/N ratio
THD 0.02% typ. @ +4 dBu, 1 kHz, unity gain
Crosstalk
Expander / Gate Section
Type IRC (Interactive Ratio Control) expander
Threshold
Ratio
Attack < 1 msec / 50 dB, program-dependent
Release
FAST: 100 msec/100 dB, variable
Compressor Section
Type IKA (Interactive Knee Adaptation) compressor
Threshold
Ratio
Attack / release Manual or automatic, variable
Manual attack time 0.3 msec/20 dB to 300 msec/20 dB, variable
Manual release time 0.05 sec/20 dB to 5 sec/20 dB, variable
Auto characteristic Wave adaptive compressor
Auto attack time Typically 15 msec for 10 dB, 5 msec for 20 dB, 3 msec for
Auto release time Typically 125 dB/sec, program-dependent
Output
MDX2600 MDX4600
XLR and ¼ " TRS connectors, servo-balanced
50 kΩ balanced, 50 kΩ unbalalanced @ 1 kHz
50 kΩ balanced, 100 kΩ unbalanced @ 1 kHz
+4 dBu / -10 dBV, switchable
+22 dBu, balanced and unbalanced
Typically 60 dB @ 1 kHz Typically 60 dB @ 1 kHz
XLR and ¼ " TRS connectors, servo-balanced
100 Ω balanced, 50 Ω unbalanced @ 1 kHz
+21 dBu, balanced and unbalanced
—
10 kΩ —
+20 dBu —
—
50 Ω —
+21 dBu —
10 Hz to 70 kHz, +0/-3 dB
115 dB, unweighted 115 dB, unweighted
0.02% typ. @ +4 dBu, 1 kHz, unity gain
-90 dB @ 1 kHz -90 dB @ 1 kHz
IRC (Interactive Ratio Control) expander
OFF to +10 dB, variable OFF to +10 dB, variable
1:1 to 1:8, variable 1:1 to 1:8, variable
< 1 msec / 50 dB, program-dependent
SLOW: 100 msec/1 dB SLOW: 100 msec/1 dB
FAST: 100 msec/100 dB, variable
IKA (Interactive Knee Adaptation) compressor
-40 to +20 dB, variable -40 to +20 dB, variable
1:1 to ∞:1, variable 1:1 to ∞:1, variable
—
—
—
Wave adaptive compressor
Typically 15 msec for 10 dB, 5 msec for 20 dB,
30 dB 3 msec for 30 dB
Typically 125 dB/sec, program-dependent
-20 to +20 dB, variable -20 to +20 dB, variable
Peak Limiter Section
Type IGC (Interactive Gain Control) peak limiter
Level 0 dB to OFF (+21 dBu), variable
Level 1 limiter type
Attack
Release
Level 2 limiter type
Attack Typically <5 msec, program-dependent
Release Typically 20 dB/sec, program-dependent
Dynamic Enhancer Section
Type IDE (Interactive Dynamic Enhancer)
Filter frequency 2.5 kHz (lower cut-off frequency)
Characteristic High-pass fi lter (6 dB/oct.)
Boost Max. 28 dB @ 7.5 kHz
De-Esser Section
Type VAD (Voice-Adaptive De-Esser)
Filter Frequencies 8.6 kHz (Female), 7.5 kHz (Male)
Filter bandwidth Program-dependent
Level reduction
Power Supply, Voltage, Current Consumption
Switch mode power supply Autorange, 100-240 V~ 50/60 Hz
Power consumption
Mains connector Standard IEC receptacle
Dimensions / Weight
Dimensions (H x W x D) 44 x 483 x 149 mm (1.7 x 19.0 x 5.9")
Weight
Quick Start Guide
MDX2600 MDX4600
IGC (Interactive Gain Control) peak limiter
0 dB to OFF (+21 dBu), variable
Clipper Clipper
"Zero" "Zero"
"Zero" "Zero"
Program limiter Program limiter
Typically <5 msec, program-dependent
Typically 20 dB/sec, program-dependent
IDE (Interactive Dynamic Enhancer)
2.5 kHz (lower cut-off frequency)
High-pass fi lter (6 dB/oct.)
Max. 28 dB @ 7.5 kHz
—
—
—
Max. 15 dB —
Autorange, 100-240 V~ 50/60 Hz
15 W 18 W
Standard IEC receptacle
44 x 483 x 149 mm (1.7 x 19.0 x 5.9")
1.7 kg (3.7 lbs ) 1.8 kg (4.0 lbs )
21