Rear Panel Features - QSC DCM 100 User Manual

Rear Panel Features

DCM 100
1
5
(8 connectors)
DCM 300
1
5
(11 connectors)
1. NETWORK (RJ45) – 10/100 Mbps Ethernet port for
DPM Manager, 3rd-party, or SNMP management and remote
access.
2. RS 232 – Serial communications port (RS232) – 3rd party
control/automation
ANALOG INPUTS, audio (DB-25) – connect to D-Cinema server or
3.
film processor with analog outputs
DPM Manager
DPM Manager is used to configure and manage your DCM and to configure the network settings if required.
Your computer must meet the following minimum requirements:
1. Computer with Windows® 7, 8, or 10 OS (32 or 64 bit) or MAC OS 10.9.5 or higher
2. 4 GB of RAM or greater
3. Display resolution of at least 1024 x 768
TD-000517-01-A
2
— Figure 2 —
2
— Figure 3 —
3
6
3
6
4. MODEL and SERIAL number
DataPort interface for QSC amplifiers – DCM 100 supports up to
5.
8 single-port amplifiers, DCM 300 supports up to 11 single-port
amplifiers.
HI MON – Hearing Impaired and monitor outputs
6.
POWER ON / OFF switch
7.
8. IEC inlet – AC mains power connector with cord lock
6
4
MODEL: DCM 100
SERIAL: 123456789
123456789
7 8
4
MODEL: DCM 300
SERIAL: 123456789
123456789
7 8