Download
Share
Print this page
Motorola CLP 446 User Instruction
  1. Manuals
  2. Brands
  3. Motorola Manuals
  4. Headsets
  5. clp446
  6. User instruction
Motorola CLP 446 User Instruction

Motorola CLP 446 User Instruction

Hide thumbs Also See for CLP 446:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual See also: User Manual
Instructions Motorola headsets
Work instructions for Motorola headsets
User instruction for the Motorola CLP 446, hereafter called headset. We advise you to completely
read this manual before using the system with the headset.
Purpose
The main purpose is for users to start using the system even faster and more effectively.
The system with the headset has the following advantages:
• Customer orientation (the customer quickly receives answers to questions and has more peace of mind
during the work)
• Working efficiently (employees save significant time due to direct communication)
• Open communication (direct response from everyone on the system)
• Increased employee knowledge
• Higher measure of safety (colleagues with a headset are immediately informed in case of an emergency)
Warranty
The headset lasts about six months in case of normal use.
We recommend testing all headsets regularly (weekly).
Cable breakage of the headset can be prevented by:
• Making sure the headset is properly stored
• Making sure the cable isn't too taut
• Making sure that the cable isn't caught behind anything
• Making sure you roll up the cable loosely
Warranty terms:
• CLP itself - 1-year warranty
• CLP headset - six-month warranty
• CLP battery - 1-month warranty
Advice
• We advise you to always keep 2 new Motorola headsets HKLN4602 as backups,
so a malfunction can be solved quickly.
• We advise you to always keep a new Motorola battery HKNN4014 as a backup,
so a malfunction can be solved quickly.

Advertisement

loading

Related Manuals for Motorola CLP 446

Summary of Contents for Motorola CLP 446

  • Page 1 Instructions Motorola headsets Work instructions for Motorola headsets User instruction for the Motorola CLP 446, hereafter called headset. We advise you to completely read this manual before using the system with the headset. Purpose The main purpose is for users to start using the system even faster and more effectively.
  • Page 2 Instructions Motorola headsets Motorola headset CLP 446 1 Volume “–“ button 2 Volume “+” button 3 On/off button (hold down button for several seconds) 4 Connection for headset cable 5 Menu button 6 Light: • Indicates different colours per channel. There are eight different colours/frequencies.

  • Page 3: Miscellaneous Parts

    (article number MO-HKNN4014) Information on use of Motorola products To optimally use the Motorola system, we have set up the principles below. Wearing the two-way radio and headset • Attach the two-way radio to the belt, edge of your trousers or trouser pocket.
  • Page 4 Instructions Motorola headsets Place headset cable • Attach the headset by holding the plug of the wire and attaching the two-way radio to it. This prevents the wire from coiling, which could cause breakage. • Attach the headset by using a loop, as shown in the picture below. This prevents a twisted wire with chance of breakage.

  • Page 5: Replacing The Battery

    Instructions Motorola headsets Cleaning • It's advisable to clean the headsets after use by using sterile hygienic wipes. • While cleaning by using the wipes, wipe the earpiece clean and make sure no moisture enters the holes. This could cause malfunctions.
  • Page 6 Instructions Motorola headsets Charging A completely charged two-way radio will last a maximum of 9 hours. • Turn off the two-way radio and place it in the charging station. • Don't wrap the wires tightly around the two-way radios, but very loosely place them in the compartments at the top of the charger.
  • Page 7 Instructions Motorola headsets Cloning two-way radios (synchronising settings) • When you have received a new two-way radio, it's possible that it's still in the default settings. To synchronise this two-way radio with the two-way radios present in the branch, you use the cloning process.
  • Page 8 Instructions Motorola headsets Cloning failed If the light of the two-way radio still flashes red after cloning, this means that the cloning has failed. In that case, carry out the following steps before trying to clone again. 1 Check if both two-way radios have been completely charged 2 Make sure that the two-way radios have been placed in the right parts of the charger with the cloning label.
  • Page 9 Instructions Motorola headsets Malfunctions Battery is empty, when you use the CLP, a “beep beep” sound is audible When the two-way radio comes with a standard battery article HKNN4014A, then this battery has a talk time of 8-9 hours after charging. If your two-way radio is more than a year old, it's recommended to replace the battery with a new one when you have no more than 8-9 hours of talk time.