Table of Contents
Advertisement
Operation
Channel Menu Options
Channel Menu Options
Auto Program should be used to memorize all the active channels in your area before you are able to use the TV.
There are two ways of storing channels in the TV's memory. You can use either.
One is called AUTO PROGRAM and the other is called MANUAL PROGRAM.
In AUTO PROGRAM mode, the TV will memorize the channels in ascending numerical order. If there are additional channels you
want to add or delete, you can manually add or delete those channels with Manual Program.
Auto Program: Channel Search
Auto Program: Channel Search
- Redo Auto Program if the Plasma Display is ever moved to another location.
- Auto Program will search for channels only through the ANT IN jack.
- If channels numbers for broadcast over-the air TV and cable TV are duplicated
where different channels have the same number, press the same number but-
tons again to toggle between:
Broadcast TV Channels
(For example, press 17 to go to the channel, press 17 again to go to the dupli-
cated channel.)
1. Press the A.PROG button and then press the
AUTO PROGRAM starts the channel search.
If you want to stop auto programming, press the ENTER button. Only the chan-
nels found up to at that time are memorized.
• You can also select the
Auto program
the
CHANNEL
menu.
Manual Program:
Adding/Deleting Channels
Manual Program:
Adding/Deleting Channels
- You can add or delete channels from the channel scan manually.
1. Use the
D / E
or NUMBER buttons to select the channel number you want to add or delete.
2. Press the MEMORY/ERASE button.
3. Use the MEMORY/ERASE button to select
4. Press the ENTER button.
• You can also do
Manual program
Fine
T
uning
Adjustment
Fine
T
uning
Adjustment
- Use this function to correct the picture's instability and condition if it is
poor.
1. Press the MENU button and then use
2. Press the
G
button and then use
3. Press the
G
button and then use
4. Use the
F / G
button to adjust the picture to your preference.
5. Press the ENTER button to save.
Notes
• To remove fine tuning from a channel, reprogram the finely-tuned channel with
Auto program or Manual Program.
• If a finely-tuned channel is memorized, the color of the channel number changes
to yellow.
16 Plasma TV
Cable TV Channels
G
button.
option and do a channel search in
Memory
or
Erase
.
with the
menu.
CHANNEL
D / E
button to select the
CHANNEL
button to select
Manual program
D / E
button to select
.
D / E
Fine
CHANNEL
Auto program
Manual program
PICTURE
Favorite channel
SOUND
TIMER
SPECIAL
PIP/DW
TWIN
Prev.
MENU
Auto program
CHANNEL
Manual program
menu.
PICTURE
Favorite channel
.
SOUND
TIMER
SPECIAL
SCREEN
PIP/DW
MENU
Prev.
G
To Start
G
TV
2
Memory
On
Fine
0
Booster
Off
Advertisement
Table of Contents
