Page 1
Access Control System STST1-79226, STST320000 STST1-71238, STST321000...
Page 2
A) The lock - main unit B) Key C) User tag D) Cutter shield (Note: not included in pack - see label) E) Batteries F) USB cable G) User manual H) Extended user manual A) The lock - main unit B) Key C) User tag A) The lock - main unit B) Key C) User tag...
THAnK yOu FOR CHOOSInG THE STAnlEy GuARD ACCESS COnTROl SySTEm. • Keeping your valuable equipment safe and accounted for is crucial. • the neW locK is the best Way to control your Job site. • the locK is easily programmed to open up during set hours and only to the authorized WorKers With user tags.
Page 5
InSTAllInG THE ADDInG nEw uSERS BATTERy (TAGS) Insert the mechanical key and rotate Insert new user tag - After it counter-clockwise to "Pairing / successful pairing the green led access control" position. will blink and buzzer will sound melody. the new user has been introduced to the system.
Page 6
DElETInG A SPECIFIC uSER Insert the mechanical key and rotate it clockwise till mechanical latch is opened. insert paired user tag to the dedicated slot. If tag is identified, the lock will sound melody and green LED will blink once, the tag will be deleted from lock’s memory.
Page 7
TEmPORARy AuTHORIzATIOn FREEzE Insert the mechanical key and rotate it counter-clockwise to "Pairing / access control" position. uSInG THIS OPTIOn THE lOCK SHAll BE OPEnED/ClOSED Only By uSInG mECHAnICAl KEy. Long press on the push button on the front panel until buzz sound is heard THIS wIll PREvEnT OTHER uSERS and red led blinks.
PC COnnECTIOn COnnECT THE lOCK TO THE PC uSInG A uSB CABlE In ORDER TO DOwnlOAD AnD uPlOAD HISTORy lOG AnD AuTHORIzATIOnS. Insert the mechanical key and rotate it counter-clockwise to the “communication” position. connect the lock to the pc using mini usb cable. open the pc software (not included in the pack).
Page 9
To disconnect from Bluetooth change key position (any other position than the “communication” position). nOTE: yOu CAn’T ACTIvATE BluETOOTH wHEn COnnECTED TO PC uSInG uSB, COnnECTIOn TO PC wIll TERmInATE BluETOOTH COnnECTIOn. nOTE: BluETOOTH wIll SHuT DOwn AuTOmATICAlly wHEn THERE IS nO COnnECTIOn ESTABlISHED DuRInG 5 mInuTE (SAvES BATTERy POwER), yOu CAn ACTIvATE BluETOOTH AGAIn By PRESSInG THE PuSH BuTTOn In “COmmunICATIOn”...
CuTTER SHIElD InSTAllATIOn Please make sure you have the supplied screw+washer and a phillips-key (2mm) as well as the units mechanical key. using the mechanical key - unlock and open the unit. insert the lock guard as shown here and slide along the lock's latch. once in place - screw the guard into final position.
TAGS it is possible to erase tags from acs database, refer to “deleting a specific user” section of user manual. it is also possible to erase specific tags using “stanley guard pc management software” or smart phone application (bluetooth version).
ImPORTAnT nOTICES this product is not user serviceable. there are no user serviceable parts inside the product. servicing at a stanley authorized service center is required to avoid damage to static sensitive internal components. unauthorized service will void the warranty.