D-Link DAP-1610 Quick Installation Manual page 17

DAP-1610
Wi-Fi Client
This configuration step is available for the Repeater and Client modes.
1. On the Wi-Fi client page, in the Wireless Networks section, select the
network to which you want to connect. When you select a network, the
Network name (SSID) and BSSID fields are filled in automatically.
If you cannot find the needed network in the list, click the UPDATE LIST
button.
2. If a password is needed to connect to the selected network, fill in the
relevant field.
If you connect to a hidden network, from the Connecting to network list
select the Connect to hidden network value. Then select the band where
the hidden network operates from the Frequency band list and enter the
network name in the Network name (SSID) field. Then select a needed
value from the Network authentication list and then, if needed, enter the
password in the relevant field.
3. Click the NEXT button.
Quick Installation Guide
17