Safety Precautions - Huawei LS1015 Quick Start Manual

To use the device properly and safely, read the safety precautions carefully before using the device
and strictly observe these precautions when using the device.

Safety precautions:

Keep the device out of the reach of children as the components or accessories may be
„
swallowed.
The power supply voltage of the device must meet the requirements on the input voltage of the
„
device.
Do not use any power adapters that are not in the standard configuration. Otherwise, the
„
device may be abnormal or unsafe.
If the power adapter is damaged and its internal circuit is exposed due to man-made factors,
„
do not touch the exposed circuit, which may bring safety risks.
Prevent objects, such as metal, from entering the device through the heat dissipation hole.
„
Dry your hands before connecting or disconnecting cables. Stop the device and switch off the
„
power before connecting or disconnecting cables.
Switch off the power and disconnect all cables, including the power cable, and network cable,
„
during periods of lightning activities. The socket-outlet shall be installed near the power adapter
and shall be easily accessible. Before use the power adapter, please check no damage on the
adapter.
Do not install telephone lines, network cables, power adapters or power adapter cables
„
outdoors. Adopting these measures will help prevent device damage and bodily injuries which
are especially prone during thunderstorms.
Install the device according to the requirements of the manufacturer. To be specific, reserve
„
at least 10 cm for heat dissipation at the top and four sides of the device, keep the device
away from flammable objects, highly magnetic or electric devices, such as microwave ovens,
refrigerators, and mobile phones.
Do not place any object on the device, so that the device will not be damaged due to
„
overheating or deformation.
If an abnormality occurs, for example, liquid entering the device, smoke, unusual sound, and
„
smell, stop the device immediately, switch off the power, disconnect all cables (such as the
power cable, and network cable) to the device, and contact the authorized service center.
Do not disassemble the device without permission. In the case of a device fault, contact the
„
authorized service center.
Dispose of the packing materials, expired batteries, and old or abandoned devices in
„
accordance to local laws and regulations (recycling them is strongly recommended).
Do not change the structure, safety design, or performance design of the device without prior
„
authorization.
Fireproof precautions:
Keep the device away from large heat source equipment, bare flames, and high-power
„
devices, such as electric heaters, candles, and blow drier, to eliminate safety risks.
If there are aged cables or power socket facilities on the power supply line to or near the
„
device, replace them in time to eliminate safety risks. The power supply voltage of the device
must meet the input voltage requirement.
Safety Precautions
1