Asus TUF Z390-PLUS GAMING User Manual page 28

6. Intel Serial ATA 6Gb/s connectors (7-pin SATA6G_1~6)
®
These connectors connect to Serial ATA 6Gb/s hard disk drives via Serial ATA 6Gb/s
signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
Z390 chipset.
®
TUF Z390-PLUS GAMING Intel
•
•
•
•
1-14
Rapid Storage Technology through the onboard Intel
®
SATA6G_6
RSATA_TXP6
RSATA_TXN6
RSATA_RXN6
RSATA_RXP6
SATA6G_5
RSATA_TXP5
RSATA_TXN5
RSATA_RXN5
RSATA_RXP5
SATA6G_3
A
SATA6G_1
B
SATA 6 Gb/s connectors
®
These connectors are set to [AHCI] by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode item in the BIOS to [Intel RST
Premium With Intel Optane System Acceleration (RAID)].
For more information on configuring your RAID sets, please refer to the RAID
Configuration Guide which you can find at https://www.asus.com/support.
When a device in SATA mode is installed on the M.2_1 socket, SATA_2 port cannot
be used.
When a device is installed on the M.2_2 socket, SATA_5/6 port cannot be used.
A
GND
GND
GND
GND
GND
GND
B
SATA6G_4
SATA6G_2
Chapter 1: Product Introduction
®