Advertisement
❶
Remove the cutting disc from drive unit and clean discs after
each procedure using warm water and mild detergent. Disinfect
with quaternary ammonia after each use. If blood is present, soak in
bleach according to manufacturer's directions for appropriate
contact time. Dry thoroughly with a clean lint-free cloth, then store
in its container.
❷
Clean guard and drive unit with an alcohol, quaternary ammonia
or hydrogen peroxide moistened lint-free cloth or equivalent wipe.
❸
Return all components to carrying case. Storage should be
done in a manner to protect the device and reduce risk for infection.
❹
Note: Do not apply any abrasive material on any part of the
equipment, spray or immerse in liquid. Do not use corrosive agents
to clean/disinfect.
PROBLEM SOLVING
CARE OF GEM® AFTER USE
❾
❿
Advertisement
