Page 1: Table Of Contents
DURO® STRIPPER Read before use and keep safe Technical Data Safety Safety instructions Maintenance Information about various floorings Troubleshooting Spare Parts Schematic 10.0 Blade Selection (800) 624-2408 (530) 626-9386 Fax (530) 626-5144 6686 Merchandise Way Diamond Springs, Ca 95619 Operating Manual Table of Contents www.sineqco.com...
Page 2: Technical Data
Sound pressure level Sound energy level Hand/Arm-Vibration Weight Comes with 2.0 Safety The Sinclair Duro® Stripper has Class 2 protective insulation. It meets the following safety specifications: DIN VDE 0740 IEC 745, The machine has radio interference suppression to the standards: 76/889/EWG, EN 55014 3.0 Safety Instructions...
Page 3: Maintenance
Disturbances that could impair safety have to be eliminated at once. 3.3 Restriction of use The Duro® Stripper is exclusively for removing bonded floor covering in dry environments. It should not be used for any other purpose. Sinclair Equipment Company cannot be held responsible for any damage or loss caused by incorrect use.
Page 4: Use
Place the handle into the end of the tube and latch the locking. For your safety the Duro® Stripper comes with the blade not mounted. Make sure that the power supply is disconnected before mounting the blade. Place the sharp bevel of the blade face up when removing from concrete surfaces and face down when removing from wood or particle board.
Page 5: Information About Various Floorings
6.0 Information about various floorings Main applications of the Duro® Stripper are carpets with foam backing, CV-flooring, PVC-floorings and light carpets. CV-floorings, PVC-floorings and carpets without foam backing Cut strips according to the blade width. Check from time to time if the blade is straight.
Page 6: Spare Parts
Needle bearing HK 1512 Cyl. screw, M5x45 Hexagon nut, M10 Pinion Sealing bushing Ball bearing Sealing ring Cover Counter sink screw, M5x16 Ball bearing 6001/2RS Bearing ring Duro Stripper Part # D015221 D015223 D015224 D015228 D015227 D014916 D015233 D015225 D015234...
Page 7 Axle Pressure Springs Starlock Cap Transport Wheels Flat Washer M10 Locknut M10 Duro Wheel Assy Complete Note: When ordering the wheel assy you get items 100-107 Handle Assembly Round Grip NOTE:when ordering D#110 you get items #111-116 T-Piece Star Grip Screw...
Page 10: Blade Selection
If you have any questions on blade selection or choice of machine, please do not hesitate to call Sinclair Equipment Company or your nearest distributor.
Page 11: Standard Warranty
Not responsible for lost job or down time. In no event shall SINCLAIR be liable for any indirect, incidental, or consequential damages from the sale or use of the product. This disclaimer applies both during and after the term of this warranty.
Page 12 NOTES...

Sinclair Duro Operating Manual

Quick Links

Table of Contents

Related Manuals for Sinclair Duro

Summary of Contents for Sinclair Duro

Table of Contents